Semiconductors
MAX485
SPDT, 2 Func, 1 Channel, CMOS, 3 X 3 MM, 0.80 MM HEIGHT, MO-220WEED-2, TQFN-16
MAX4852ETE
SPDT, 2 Func, 1 Channel, CMOS, 3 X 3 MM, 0.80 MM HEIGHT, MO-220WEED-2, TQFN-16
MAX485CSA+T
Maxim MAX485CSA+T, Line Transceiver, RS-422, RS-485, 5 V, 8-Pin SOIC
MAX485ESA+
Surface mount transceiver IC for RS485/RS422 communication, featuring a 2.5Mbps data rate and half-duplex operation. This integrated circuit operates at a 5V supply voltage with a typical 500uA current draw. It includes one driver and one receiver, housed in an 8-pin SOIC package measuring 5mm x 4mm x 1.5mm. The component offers a wide operating temperature range from -40°C to 85°C and is lead-free and RoHS compliant.
MAX485ESA+T
Surface mountable transceiver IC for RS-485 and RS-422 interfaces, operating at a 2.5Mbps data rate. Features a single driver and receiver for half-duplex communication. Housed in an 8-pin SOIC package with dimensions of 5mm length, 4mm width, and 1.5mm height. Operates from a 4.75V to 5.25V supply voltage with a typical supply current of 500µA. Compliant with RoHS standards, suitable for operation between 0°C and 70°C.
MAX7219
LED Driver, 7-Segment, MOS, PDSO24, 0.300 INCH, MS-013, SOIC-24
MAX7219CNG+
8-output LED driver IC with common cathode configuration, supporting up to 64 segments. Features a 4-wire serial interface for easy control and operates from a 4V to 5.5V input voltage range. Delivers a maximum output current of 320mA at 4.5V, with a 10MHz switching frequency. Packaged in a DIP through-hole mount, this RoHS compliant component offers a maximum power dissipation of 1.066W and operates within a 0°C to 70°C temperature range.
MAX7219EWG
LED Driver, 7-Segment, MOS, PDSO24, 0.300 INCH, MS-013, SOIC-24
MAX9032ASA+
Dual comparator IC featuring ultra-small SOIC package for surface mount applications. Operates with dual supply voltages from 1.25V to 2.75V or single supply from 2.5V to 5.5V. Offers a 4mV hysteresis, 5mV input offset voltage, and 80nA input bias current. Achieves 100dB common mode rejection ratio and 100dB power supply rejection ratio. Includes TTL, push-pull outputs with a 188ns response time and 228ns propagation delay.
MAX9611AUB+
Single-channel current sense operational amplifier featuring a 2.5MHz gain bandwidth product and 4MHz -3dB bandwidth. This IC offers a 100dB common mode rejection ratio and operates from a 2.7V to 5.5V supply voltage. It boasts a low input bias current of 1uA and an input offset voltage of 350uV, with a maximum supply current of 2.6mA. Packaged in a compact UMAX case, this RoHS compliant component is suitable for applications requiring precise current monitoring.
MAX97220AETE+T
The MAX97220AETE+T is a surface-mount audio amplifier with a maximum operating temperature of 85°C and a minimum operating temperature of -40°C. It has a maximum supply voltage of 5.5V and a minimum supply voltage of 2.5V. The amplifier is RoHS compliant and has a power supply rejection ratio of 90dB. It is available in a tape and reel packaging with 2500 units per package.
MAX9814ETD+T
Mono audio amplifier IC featuring a 5.5V maximum supply voltage and 60dB voltage gain. This surface mount component operates from a 2.7V to 5.5V supply, offering 80dB power supply rejection ratio and 3.1mA operating current. Designed for 50 Ohm load impedance, it boasts a wide operating temperature range of -40°C to 85°C and is RoHS compliant.
MAX98357A
PCM input Class D audio amplifier drives a single mono speaker from a digital audio interface. The device operates from a 2.5 V to 5.5 V supply and supports standard I2S input using DIN, BCLK, and LRCLK signals. Output power reaches up to 3.2 W into a 4 ohm load, with high-efficiency Class D operation and integrated speaker-protection features. Supported audio sample rates span 8 kHz to 96 kHz, and the operating temperature range is rated for industrial environments.
MB10S
Single-phase bridge rectifier diode, 800 mA forward current, 1 kV maximum repetitive reverse voltage. Features 1.1 V forward voltage drop and operates up to 150°C. Packaged in SMD/SMT with 4 pins, supplied in cut tape. RoHS compliant.
MB10S-50MIL
Single-phase bridge rectifier diode, 800 mA forward current, 1 kV maximum repetitive reverse voltage. Features 1.1 V forward voltage drop and operates up to 150°C. Packaged in SMD/SMT with 4 pins, supplied in cut tape. RoHS compliant.
MB6S
Surface mount bridge rectifier diode with 600V repetitive reverse voltage and 500mA average rectified current. Features a 4-pin SOIC package, 35A maximum forward surge current, and operates from -55°C to 150°C. This RoHS compliant component offers 1.4W power dissipation and is supplied in tape and reel packaging.
MB85RC256VPF-G-JNE2
Memory Circuit, 32KX8, CMOS, PDSO8, 5.30 X 5.24 MM, 1.27 MM PITCH, ROHS COMPLIANT, PLASTIC, SOP-8
MB85RC64VPNF-G-JNE1
Memory Circuit, 8KX8, CMOS, PDSO8, 3.90 X 5.05 MM, 1.75 MM HEIGHT, 1.27 MM PITCH, ROHS COMPLIANT, PLASTIC, SOP-8
MBR0520LT1G
Schottky rectifier diode with a maximum repetitive peak reverse voltage of 20V and a forward current of 0.5A. Features a silicon diode element and a dual terminal configuration within a 2-pin SOD-123 package. Operates across a temperature range of -65°C to 125°C.
MBR0530T1G
Surface mount Schottky power rectifier with a maximum repetitive peak reverse voltage of 30 V and a continuous forward current of 500 mA. Features a 2-terminal, dual terminal configuration with a silicon diode element. Operates within a temperature range of -65°C to 125°C.