Semiconductors
LTV-217-B-G
OPTOISOLATOR 3.75KV TRANS 4-SSOP
LTV-817S-TA1-C
Single channel transistor output optocoupler, featuring 5kV isolation voltage and 35V collector-emitter voltage. This surface mount device offers a 400% current transfer ratio and a maximum collector current of 50mA. With a 200mV collector-emitter saturation voltage and 200mW maximum power dissipation, it operates from -30°C to 110°C.
LV8729
The LV8729V-TLM-H is a surface mount motor driver from Onsemi, designed to operate within a temperature range of -30°C to 85°C. It features an output current of 1.8A and is packaged in a halogen and lead free SSOP-44 package. This device is RoHS compliant and available in quantities of 2000. It is suitable for use in applications where halogen-free and lead-free components are required.
LV8729V-TLM-H
The LV8729V-TLM-H is a surface mount motor driver from Onsemi, designed to operate within a temperature range of -30°C to 85°C. It features an output current of 1.8A and is packaged in a halogen and lead free SSOP-44 package. This device is RoHS compliant and available in quantities of 2000. It is suitable for use in applications where halogen-free and lead-free components are required.
M1F
This 10-position, 2-row cable assembly is 3 feet in length and features a grey color with gold contact plating. It has a cable pitch of 0.05 inch and a connector pitch of 0.1 inch. The assembly is unshielded and designed for cable mounting.
M24C02-WMN6TP
2 Kbit serial I²C bus EEPROM for surface mount applications. Features a 2-wire serial interface with a maximum frequency of 400kHz and an access time of 900ns. Operates with a supply voltage range of 2.5V to 5.5V, supporting 5V nominal operation. This RoHS compliant memory component is organized as 256 x 8 bits and includes write protection. Packaged in a compact SOIC case with dimensions of 4.9mm length, 3.9mm width, and 1.25mm height.
M24C64-RMN6TP
64 Kbit serial I²C bus EEPROM for surface mount applications. Features 8K x 8 organization with a 1MHz maximum frequency and 400kHz maximum I²C interface speed. Offers a wide operating voltage range from 1.8V to 5.5V, with a typical 5V supply. Access times are as fast as 450ns, and it supports write protection. Packaged in SOIC, this RoHS compliant memory component operates between -40°C and 85°C.
M7F
Rectifier Diode,
MAC97A6
400V, 0.6A, 4 QUADRANT LOGIC LEVEL TRIAC, TO-92, PLASTIC, SC-43, 3 PIN
MAC97A8
The MAC97A8 is a TRIAC from Onsemi with a DC rated voltage of 600V and a current rating of 600mA. It operates over a temperature range of -40°C to 110°C and is packaged in a TO-92-3 case. The device is lead free and RoHS compliant, making it suitable for a variety of applications.
MAX13487EESA+T
Half-duplex RS-422/RS-485 bus transceiver, surface mountable in an 8-pin SO package. Features a 500Kbps data rate, 4.75V to 5.25V supply voltage range, and 4.5mA supply current. Operates between -40°C and 85°C with a maximum power dissipation of 471mW. Includes one driver and one receiver with 25mV receiver hysteresis and 1000ns propagation delay.
MAX232
Dual EIA-232 driver and receiver in a 16-PDIP through-hole package. Features 2 drivers and 2 receivers for full-duplex communication, supporting data rates up to 120Kbps. Operates with a 5V supply voltage (4.5V to 5.5V) and offers a wide temperature range of -40°C to 85°C. Includes 8 I/Os with 500mV receiver hysteresis and a propagation delay of 0.5us. This RoHS compliant component is lead-free.
MAX232CSE+T
Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, SOP-16
MAX232D
Dual Transmitter/Receiver RS-232 Interface IC, full duplex operation with two transmitters and two receivers. Features 120Kbps data rate, 5V operating supply voltage (4.5V to 5.5V range), and 10mA max supply current. Surface mountable in a 16-pin SOIC package (3.91mm width, 9.9mm length, 1.58mm height) with ESD protection. Operating temperature range from -40°C to 85°C, lead-free and RoHS compliant.
MAX232ESE+T
Line Transceiver, 2 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, SOP-16
MAX232INE4
Dual EIA-232 Transceiver, 120Kbps, 5V, 2 Drivers/2 Receivers, PDIP
MAX232N
Dual transmitter/receiver bus transceiver for RS-232 communication. Features two transmitters and two receivers, supporting full-duplex operation. Operates with a 5V supply voltage (4.5V to 5.5V) and offers a data rate of 120Kbps. Includes ESD protection and is RoHS compliant. Packaged in a 16-pin PDIP with through-hole mounting.
MAX3232
The transceiver integrates two drivers and two receivers for RS-232 serial links from a 3.0 V to 5.5 V single supply. It uses a capacitor charge pump with four 0.1 µF external capacitors and supports guaranteed data rates to 120 kbit/s. Receiver inputs tolerate ±25 V and transmitter outputs deliver RS-232 levels with at least ±5 V swing into standard loads. Multiple 16-pin package options exist for commercial and extended temperature suffixes.
MAX3232CSE+T
Line Transceiver, 1 Func, 2 Driver, 2 Rcvr, CMOS, PDSO16, 0.150 INCH, MS-012C, SOIC-16
MAX4466EXK+T
Audio Preamplifier, 1 Channel(s), 1 Func, BICMOS, PDSO5, SC-70, 5 PIN