LM675
Power operational amplifier featuring a 5.5MHz bandwidth and 8V/µs slew rate. This single-channel, through-hole mounted IC offers a high output current of 3A per channel and a voltage gain of 90dB. Operating from dual supplies between 8V and 30V, or single supplies from 16V to 60V, it boasts a 70dB common mode rejection ratio and power supply rejection ratio. The bipolar technology component is housed in a TO-220 package, with a maximum power dissipation of 30W and an operating temperature range of 0°C to 70°C.
Similar Components
CD4093
CMOS logic IC featuring four independent 2-input NAND gates with Schmitt-Trigger inputs. Operating across a 3V to 18V supply range, this component offers a maximum output current of 6.8mA and a high-level output current of -4.2mA, with a low-level output current of 4.2mA. The PDIP package with gold contact plating supports through-hole mounting and operates from -55°C to 125°C. Propagation delay is 130ns, with a turn-on delay time of 380ns.
OP07CDR
Single operational amplifier featuring a low input offset voltage of 150µV and a low offset voltage of 0.25mV. This general-purpose amplifier offers a 600kHz bandwidth and a gain bandwidth product of 600kHz. It operates with a dual supply voltage range of 3V to 18V, providing a typical supply current of 5mA and an output current per channel of 10mA. The amplifier boasts a high common mode rejection ratio of 100dB and a slew rate of 0.3V/µs. Packaged in an 8-SOIC (D) case, this RoHS compliant component is suitable for operation between 0°C and 70°C.
CD4030BE
Dual XOR Gate IC, 14-Pin DIP, 5V, 18V, -55C to 125C
CD4532
CMOS priority encoder IC, featuring 8 input lines to 3 output lines, with a bandwidth of 8MHz. This through-hole mounted component operates with a minimum supply voltage of 3V and a maximum of 18V, offering a propagation delay of 110ns. It supports a high-level output current of 6.8mA and a low-level output current of 6.8mA, with a maximum operating temperature of 125°C. The device is RoHS compliant and packaged in a 16-pin PDIP tube.
ADS1256
24-bit, 30 kSPS Delta-Sigma Analog-to-Digital Converter (ADC) with 8 analog inputs. Features a programmable gain amplifier (PGA), SPI interface, and bipolar polarity. Operates from 1.8V to 3.6V analog and 4.75V to 5.25V digital supply voltages. Housed in a 28-pin SSOP package with gold contact plating, suitable for surface-mount technology. RoHS compliant with a maximum power dissipation of 57mW and an operating temperature range of -40°C to 85°C.
CD4040
CMOS ripple-carry binary counter/divider provides 12 counter stages built from master-slave flip-flops. The counter advances on the negative transition of each input pulse, and a high level on RESET clears all stages to zero. Schmitt-trigger action on the input-pulse line permits unlimited rise and fall times, and all inputs and outputs are buffered. The device operates from 3 V to 18 V supplies across a -55°C to 125°C operating temperature range.
About LM675
The Texas Instruments LM675 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Power operational amplifier featuring a 5.5MHz bandwidth and 8V/µs slew rate. This single-channel, through-hole mounted IC offers a high output current of 3A per channel and a voltage gain of 90dB. Operating from dual supplies between 8V and 30V, or single supplies from 16V to 60V, it boasts a 70dB common mode rejection ratio and power supply rejection ratio. The bipolar technology component is housed in a TO-220 package, with a maximum power dissipation of 30W and an operating temperature range of 0°C to 70°C.. Key parameters include Amplifier Type: POWER, Bandwidth: 5.5MHz, Common Mode Rejection Ratio: 70dB, Dual Supply Voltage: 9V, and Gain Bandwidth Product: 5.5MHz. LM675 is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
- File Size
- 2 MB
Ask AI Assistant
Ask questions about LM675 specifications
Click to ask a quick question:
Parameters
| Amplifier Type | POWER |
| Bandwidth | 5.5MHz |
| Common Mode Rejection Ratio | 70dB |
| Dual Supply Voltage | 9V |
| Gain Bandwidth Product | 5.5MHz |
| Height | 8.64mm |
| Input Bias Current | 200nA |
| Input Offset Voltage (Vos) | 1mV |
| Lead Free | Lead Free |
| Length | 10.16mm |
| Max Dual Supply Voltage | 30V |
| Max Operating Temperature | 70°C |
| Max Supply Voltage | 60V |
| Min Dual Supply Voltage | 8V |
| Min Operating Temperature | 0°C |
| Min Supply Voltage | 16V |
| Mount | Through Hole |
| Number of Amplifiers | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Elements | 1 |
| Operating Supply Current | 18mA |
| Output Current per Channel | 3A |
| Package/Case | TO-220 |
| Packaging | Rail/Tube |
| Power Dissipation | 30W |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Quest | 31$7.1541$4.7694———View offer |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 8V/µs |
| Supply Current | 18mA |
| Technology | BIPOLAR |
| Unity Gain Bandwidth Product | 5.5MHz |
| Voltage Gain | 90dB |
| Width | 4.57mm |