JFET Op Amp, 5MHz BW, 12V/µs SR, 8-PDIP, Through Hole
Quad SPST Analog Switch IC, featuring 4 independent circuits for versatile signal routing. Operates with dual or single supply voltages from 1.5V to 18V, with a maximum dual supply of 9V. CMOS technology ensures low quiescent current of 20nA and a maximum supply current of 5uA. Offers a bandwidth of 40MHz and is housed in a 14-pin PDIP package for through-hole mounting. Contact plating is gold, and the component is RoHS compliant.
A precision 12-bit Analog-to-Digital Converter (ADC) offers up to four single-ended or two differential input channels, featuring an integrated programmable gain amplifier (PGA), internal reference, and oscillator for streamlined sensor measurement. It provides flexible sampling rates ranging from 128 SPS to 3300 SPS, leveraging a Sigma-Delta architecture to achieve high accuracy across PGA input ranges from ±256 mV to ±6.144 V. Designed for space-constrained applications, it communicates via an I2C-compatible interface supporting four pin-selectable addresses. Operating over a wide supply voltage range of 2.0V to 5.5V, the ADC maintains a low typical current consumption of 150 µA in continuous-conversion mode, suitable for extended operation in environments from -40°C to +125°C. Additional integrated features include a programmable comparator and single-shot mode with auto power-down, all housed in an ultra-small 10-pin VSSOP package. The ADS1015 is an ultra-small, low-power, 12-bit precision analog-to-digital converter (ADC) featuring an internal reference, oscillator, and a programmable gain amplifier (PGA). It is designed for space-constrained sensor measurement applications with an I2C-compatible interface.
The TLC5916 is a constant-current LED sink driver designed to work alone or be cascaded. It contains an 8-bit shift register and data latches that convert serial input data into parallel output format. The device features eight regulated-current ports that provide uniform and constant current for driving LEDs with a wide range of forward voltage variations. It includes an external resistor to set the output current from 5 mA to 120 mA and provides excellent output current accuracy.
CMOS logic IC featuring four independent 2-input NAND gates. Operates with a supply voltage range of 3V to 18V, offering a high level output current of -4.2mA and a low level output current of 4.2mA. The component boasts a propagation delay of 90ns and is housed in a 14-pin PDIP package with gold contact plating, suitable for through-hole mounting. With a maximum operating temperature of 125°C and RoHS compliance, this integrated circuit is designed for reliable performance.
CMOS Hex D-Type Flip-Flop, 16MHz, 18V, SOIC
15MHz Op Amp, 70V/µs Slew Rate, 20V, 1-Ch, DIP
The Texas Instruments LF356N/NOPB Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: JFET Op Amp, 5MHz BW, 12V/µs SR, 8-PDIP, Through Hole. Key parameters include Bandwidth: 5MHz, Common Mode Rejection Ratio: 80dB, Dual Supply Voltage: 15V, Gain Bandwidth Product: 5MHz, and Height: 3.3mm. LF356N/NOPB is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Ask questions about LF356N/NOPB specifications
Click to ask a quick question:
LF356N/NOPB is a single‑channel JFET op‑amp with a 5 MHz bandwidth, 12 V/µs slew rate, and a gain‑bandwidth product of 5 MHz. It operates on a dual supply of 10–18 V (max 36 V) with a typical operating current of 5 mA and can deliver up to 25 mA output current. Key parameters include 80 dB CMRR/PSRR, 30 pA input bias current, 3 mV input offset voltage, and a PDIP‑8 through‑hole package operating from 0 °C to 70 °C.
| Bandwidth | 5MHz |
| Common Mode Rejection Ratio | 80dB |
| Dual Supply Voltage | 15V |
| Gain Bandwidth Product | 5MHz |
| Height | 3.3mm |
| Input Bias Current | 30pA |
| Input Offset Voltage (Vos) | 3mV |
| Lead Free | Lead Free |
| Length | 9.27mm |
| Max Dual Supply Voltage | 18V |
| Max Operating Temperature | 70°C |
| Max Output Current | 25mA |
| Max Supply Voltage | 36V |
| Min Operating Temperature | 0°C |
| Min Supply Voltage | 10V |
| Mount | Through Hole |
| Number of Amplifiers | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Elements | 1 |
| Operating Supply Current | 5mA |
| Output Current | 25mA |
| Output Current per Channel | 25mA |
| Package/Case | PDIP |
| Package Quantity | 40 |
| Packaging | Rail/Tube |
| Power Dissipation | 670mW |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Series | BI-FET™ |
| Settling Time | 1.5us |
| Slew Rate | 12V/µs |
| Supply Current | 5mA |
| Technology | BIFET |
| Thickness | 3.9mm |
| Unity Gain Bandwidth Product | 5MHz |
| Voltage Gain | 106.02dB |
| Width | 6.35mm |