CD4052BE
Dual 4:1 analog multiplexer, featuring two independent 4-channel multiplexers on a single chip. This through-hole component is housed in a 16-pin PDIP plastic package with a 2.54mm pin pitch. It offers 8 inputs and 2 outputs, with a maximum on-resistance of >=1000 Ohm. Operating temperature range spans from -55 °C to 125 °C.
Similar Components
LM567CM/NOPB
Tone Decoder IC, 0.5MHz, 4.75-9V, SOIC
LF356
JFET input operational amplifier featuring a 5MHz bandwidth and 12V/µs slew rate. This single-channel amplifier offers a 3mV input offset voltage and 30pA input bias current, with a 1.5µs settling time. Designed for through-hole mounting in an 8-PDIP package, it operates from a dual supply voltage range of ±10V to ±18V, with a maximum supply voltage of ±36V. Key performance metrics include 80dB common mode rejection ratio and 80dB power supply rejection ratio.
OPA2350UA
Dual, single-supply, rail-to-rail operational amplifier featuring 38MHz bandwidth and 22V/µs slew rate. This general-purpose amplifier offers low input bias current of 10pA and input voltage noise density of 7nV/sqrt Hz. Operating from 2.7V to 5.5V, it provides 40mA output current per channel and boasts a 122dB voltage gain. The 8-SOIC package is RoHS compliant and suitable for operation between -40°C and 85°C.
NE555DR
Single channel timer IC, operating from 4.5V to 16V, with a frequency range up to 100kHz. Features include 200mA output current capability (both high and low level) and a maximum operating temperature of 70°C. This surface mount component is housed in an 8-pin SOIC package, measuring 4.9mm in length, 3.91mm in width, and 1.58mm in height. It is RoHS compliant and supplied on tape and reel.
LM380
Mono audio amplifier IC delivering 2.5W output power into an 8-ohm load. Features a voltage gain of 34dB and a bandwidth of 100kHz. Operates from a single supply voltage between 10V and 22V. Packaged in an 8-pin PDIP for through-hole mounting. RoHS compliant and lead-free.
TL072CD
Dual low-noise JFET-input operational amplifier featuring a 3MHz bandwidth and 3MHz gain bandwidth product. This general-purpose op-amp offers a 13V/µs slew rate and 106.02dB voltage gain. It operates with dual supply voltages ranging from 3.5V to 18V, with a maximum dual supply voltage of 18V. The component boasts a low input bias current of 200pA and an input offset voltage of 3mV. Housed in a lead-free 8-SOIC package (D), it operates across a wide temperature range of -40°C to 85°C.
About CD4052BE
The Texas Instruments CD4052BE Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Dual 4:1 analog multiplexer, featuring two independent 4-channel multiplexers on a single chip. This through-hole component is housed in a 16-pin PDIP plastic package with a 2.54mm pin pitch. It offers 8 inputs and 2 outputs, with a maximum on-resistance of >=1000 Ohm. Operating temperature range spans from -55 °C to 125 °C.. Key parameters include AEC Qualified: No, Automotive: No, Basic Package Type: Through Hole, Cage Code: 01295, and Configuration: Dual 4:1. CD4052BE is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
- File Size
- 1 MB
Ask AI Assistant
Ask questions about CD4052BE specifications
Click to ask a quick question:
Parameters
| AEC Qualified | No |
| Automotive | No |
| Basic Package Type | Through Hole |
| Cage Code | 01295 |
| Configuration | Dual 4:1 |
| ECCN | EAR99 |
| EU RoHS | Yes |
| HTS Code | 8542390001 |
| Jedec | MS-001BB |
| Lead Shape | Through Hole |
| Maximum On Resistance Range | >=1000Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Mounting | Through Hole |
| Multiplexer Architecture | 4:1 |
| Number of Channels per Chip | 2 |
| Number of Inputs per Chip | 8 |
| Number of Outputs per Chip | 2 |
| Package/Case | PDIP |
| Package Description | Plastic Dual In Line Package |
| Package Family Name | DIP |
| Package Height (mm) | 5.08(Max) - 0.51(Min) |
| Package Length (mm) | 19.69(Max) |
| Package Material | Plastic |
| Package Width (mm) | 6.6(Max) |
| PCB | 16 |
| Pin Count | 16 |
| Pin Pitch (mm) | 2.54 |
| PPAP | No |
| Radiation Hardening | No |
| RoHS Versions | 2011/65/EU, 2015/863 |
| RS UK | 1,88050———$0.7442TubeView offer |
| Schedule B | 8542390000 |
| Seated Plane Height (mm) | 5.08(Max) |
| TME | 1,0911$0.68$0.483$0.449$0.423pcsView offer |
| Type | Analog Multiplexer |