CD4027
Dual JK-type master-slave flip-flop IC, positive edge triggered, featuring two independent elements. Operates with a 3V to 18V supply voltage, offering a maximum frequency of 24MHz. This CMOS logic component provides 4.2mA high-level and 4.2mA low-level output current, with a typical quiescent current of 4uA. Packaged in a 16-pin PDIP with gold contact plating, it supports through-hole mounting and is RoHS compliant.
Similar Components
CD4511
The CD4511BF3A is a CMOS decoder/latch IC with 4 inputs and 7 outputs. It operates over a supply voltage range of 3V to 18V and can withstand temperatures between -55°C and 125°C. The device is packaged in a DIP-16 configuration and features a non-inverting polarity. The IC has a propagation delay of 1320ns and a turn-on delay time of 1320ns, with a quiescent current of 100uA. The CD4511BF3A is not radiation hardened and is not RoHS compliant.
LF356
JFET input operational amplifier featuring a 5MHz bandwidth and 12V/µs slew rate. This single-channel amplifier offers a 3mV input offset voltage and 30pA input bias current, with a 1.5µs settling time. Designed for through-hole mounting in an 8-PDIP package, it operates from a dual supply voltage range of ±10V to ±18V, with a maximum supply voltage of ±36V. Key performance metrics include 80dB common mode rejection ratio and 80dB power supply rejection ratio.
CD4081
CMOS logic IC featuring four independent 2-input AND gates. Operates with supply voltages from 3V to 18V, offering a maximum output current of 6.8mA. This through-hole mounted component, packaged in a 14-pin PDIP, boasts a propagation delay of 90ns and a turn-on delay time of 12ns. With a wide operating temperature range of -55°C to 125°C, it is RoHS compliant and constructed with a plastic package body.
TL074CN
Quad low-noise JFET-input operational amplifier featuring a 3MHz bandwidth and 13V/µs slew rate. This general-purpose amplifier offers a 70dB common mode rejection ratio and a 200pA input bias current. Designed for dual supply operation from ±3.5V to ±18V, it boasts a 106dB voltage gain. The component is housed in a 14-PDIP package and operates across a wide temperature range of -40°C to 85°C.
NE5534P
Low-noise operational amplifier featuring a 10MHz bandwidth and 13V/µs slew rate. This general-purpose amplifier offers a 100dB voltage gain and a 38mA output current per channel. Designed for dual supply operation from ±5V to ±15V, it boasts a 70dB common mode rejection ratio and a 4mV input offset voltage. Packaged in an 8-PDIP, this bipolar IC operates within a 0°C to 70°C temperature range and is RoHS compliant.
SN75176BDR
Differential bus transceiver, half-duplex, featuring a single driver and receiver for robust data communication. Operates with a supply voltage of 5V (4.75V to 5.25V) and supports data rates up to 10Mbps. This integrated circuit is housed in an 8-SOIC package, with a maximum operating temperature of 70°C. RoHS compliant and lead-free, it offers an output current of 60mA and an operating supply current of 70mA.
About CD4027
The Texas Instruments CD4027 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Dual JK-type master-slave flip-flop IC, positive edge triggered, featuring two independent elements. Operates with a 3V to 18V supply voltage, offering a maximum frequency of 24MHz. This CMOS logic component provides 4.2mA high-level and 4.2mA low-level output current, with a typical quiescent current of 4uA. Packaged in a 16-pin PDIP with gold contact plating, it supports through-hole mounting and is RoHS compliant.. Key parameters include Clock Edge Trigger Type: Positive Edge, Contact Plating: Gold, Frequency: 24MHz, Height: 4.57mm, and High Level Output Current: -4.2mA. CD4027 is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
- File Size
- 1 MB
Ask AI Assistant
Ask questions about CD4027 specifications
Click to ask a quick question:
Parameters
| Clock Edge Trigger Type | Positive Edge |
| Contact Plating | Gold |
| Frequency | 24MHz |
| Height | 4.57mm |
| High Level Output Current | -4.2mA |
| Input Capacitance | 5pF |
| Input Type | SINGLE-ENDED |
| Lead Free | Lead Free |
| Length | 19.3mm |
| Logic Function | Flip-Flop, JK-Type |
| Low Level Output Current | 4.2mA |
| Max Frequency | 24MHz |
| Max Operating Temperature | 125°C |
| Max Supply Voltage | 18V |
| Min Operating Temperature | -55°C |
| Min Supply Voltage | 3V |
| Mount | Through Hole |
| Number of Bits | 2 |
| Number of Bits per Element | 1 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Number of Elements | 2 |
| Number of Input Lines | 2 |
| Number of Inputs | 1 |
| Number of Output Lines | 1 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 3.3V |
| Output Current | 6.8mA |
| Package/Case | PDIP |
| Package Quantity | 25 |
| Packaging | Rail/Tube |
| Polarity | Non-Inverting |
| Power Dissipation | 500mW |
| Propagation Delay | 300ns |
| Quiescent Current | 4uA |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Series | 4000B |
| Technology | CMOS |
| Thickness | 3.9mm |
| TME | 1,2431$1.02$0.743$0.68$0.639pcsView offer |
| Turn-On Delay Time | 45ns |
| Weight | 0.03357oz |
| Width | 6.35mm |