ADS1015IDGSR

A precision 12-bit Analog-to-Digital Converter (ADC) offers up to four single-ended or two differential input channels, featuring an integrated programmable gain amplifier (PGA), internal reference, and oscillator for streamlined sensor measurement. It provides flexible sampling rates ranging from 128 SPS to 3300 SPS, leveraging a Sigma-Delta architecture to achieve high accuracy across PGA input ranges from ±256 mV to ±6.144 V. Designed for space-constrained applications, it communicates via an I2C-compatible interface supporting four pin-selectable addresses. Operating over a wide supply voltage range of 2.0V to 5.5V, the ADC maintains a low typical current consumption of 150 µA in continuous-conversion mode, suitable for extended operation in environments from -40°C to +125°C. Additional integrated features include a programmable comparator and single-shot mode with auto power-down, all housed in an ultra-small 10-pin VSSOP package. The ADS1015 is an ultra-small, low-power, 12-bit precision analog-to-digital converter (ADC) featuring an internal reference, oscillator, and a programmable gain amplifier (PGA). It is designed for space-constrained sensor measurement applications with an I2C-compatible interface.

Download PDF

Similar Components

CD4027

Dual JK-type master-slave flip-flop IC, positive edge triggered, featuring two independent elements. Operates with a 3V to 18V supply voltage, offering a maximum frequency of 24MHz. This CMOS logic component provides 4.2mA high-level and 4.2mA low-level output current, with a typical quiescent current of 4uA. Packaged in a 16-pin PDIP with gold contact plating, it supports through-hole mounting and is RoHS compliant.

Texas InstrumentsSemiconductors
31 6

NE5532P

Dual-channel, general-purpose operational amplifier with a 10MHz bandwidth and 9V/µs slew rate. Features low noise, 100dB voltage gain, and 70dB common mode rejection ratio. Operates from a 5V to 15V dual supply voltage, with a 26V output swing. Housed in an 8-PDIP package, this RoHS compliant component is suitable for audio applications within a 0°C to 70°C temperature range.

Texas InstrumentsSemiconductors
33 6

CD4511

The CD4511BF3A is a CMOS decoder/latch IC with 4 inputs and 7 outputs. It operates over a supply voltage range of 3V to 18V and can withstand temperatures between -55°C and 125°C. The device is packaged in a DIP-16 configuration and features a non-inverting polarity. The IC has a propagation delay of 1320ns and a turn-on delay time of 1320ns, with a quiescent current of 100uA. The CD4511BF3A is not radiation hardened and is not RoHS compliant.

Texas InstrumentsSemiconductors
31 6

CD4093

CMOS logic IC featuring four independent 2-input NAND gates with Schmitt-Trigger inputs. Operating across a 3V to 18V supply range, this component offers a maximum output current of 6.8mA and a high-level output current of -4.2mA, with a low-level output current of 4.2mA. The PDIP package with gold contact plating supports through-hole mounting and operates from -55°C to 125°C. Propagation delay is 130ns, with a turn-on delay time of 380ns.

Texas InstrumentsSemiconductors
29 5

TLC5916

The TLC5916 is a constant-current LED sink driver designed to work alone or be cascaded. It contains an 8-bit shift register and data latches that convert serial input data into parallel output format. The device features eight regulated-current ports that provide uniform and constant current for driving LEDs with a wide range of forward voltage variations. It includes an external resistor to set the output current from 5 mA to 120 mA and provides excellent output current accuracy.

Texas InstrumentsSemiconductors
30 6

CD4518BPWE4

CMOS Dual BCD Up-Counter, 4-Bit, 8MHz, 18V, TSSOP

Texas InstrumentsSemiconductors
26 6

About ADS1015IDGSR

The Texas Instruments ADS1015IDGSR Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: A precision 12-bit Analog-to-Digital Converter (ADC) offers up to four single-ended or two differential input channels, featuring an integrated programmable gain amplifier (PGA), internal reference, and oscillator for streamlined sensor measurement. It provides flexible sampling rates ranging from 128 SPS to 3300 SPS, leveraging a Sigma-Delta architecture to achieve high accuracy across PGA input ranges from ±256 mV to ±6.144 V. Designed for space-constrained applications, it communicates via an I2C-compatible interface supporting four pin-selectable addresses. Operating over a wide supply voltage range of 2.0V to 5.5V, the ADC maintains a low typical current consumption of 150 µA in continuous-conversion mode, suitable for extended operation in environments from -40°C to +125°C. Additional integrated features include a programmable comparator and single-shot mode with auto power-down, all housed in an ultra-small 10-pin VSSOP package. The ADS1015 is an ultra-small, low-power, 12-bit precision analog-to-digital converter (ADC) featuring an internal reference, oscillator, and a programmable gain amplifier (PGA). It is designed for space-constrained sensor measurement applications with an I2C-compatible interface.. Key parameters include architecture: Sigma-Delta, channels: 4 Single-Ended or 2 Differential inputs, current_consumption: 150 (typical in continuous-conversion mode)µA, interface: I2C with four pin-selectable addresses, and on_board_features: Internal low-drift voltage reference, Internal oscillator, Programmable comparator, Single-shot mode with auto power-down. ADS1015IDGSR is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.

Specifications

Manufacturer
Texas Instruments
Category
Semiconductors
File Size
2 MB

Ask AI Assistant

Ask questions about ADS1015IDGSR specifications

AI Powered

Click to ask a quick question:

Parameters

architectureSigma-Delta
channels4 Single-Ended or 2 Differential inputs
current_consumption150 (typical in continuous-conversion mode)µA
interfaceI2C with four pin-selectable addresses
on_board_featuresInternal low-drift voltage reference, Internal oscillator, Programmable comparator, Single-shot mode with auto power-down
operating_temperature_range-40 to +125°C
pga_input_ranges±256 mV to ±6.144V
resolution12-bit
sampling_rate128 to 3300SPS
supply_voltage_range2.0 to 5.5V