TS912IDT
Dual operational amplifier featuring CMOS inputs for low power consumption. This general-purpose op amp offers a 1.4MHz bandwidth and a 1MHz gain bandwidth product. It operates from a dual supply voltage range of 1.35V to 8V, with a maximum single supply of 16V. The surface-mount SOIC package houses two amplifiers, each capable of 75mA output current, and boasts a low input bias current of 150pA.
Similar Components
L298
Dual full bridge motor driver IC featuring bipolar technology, capable of driving brushed DC motors. Offers two independent driver channels with four outputs, supporting a maximum output current of 2A per channel and a maximum collector current of 4A. Operates with a supply voltage range from 4.8V to 46V, with a typical operating supply voltage of 42V. Includes over-temperature fault protection and a low drain-to-source resistance of 930mR. Packaged in a 15-pin MULTIWATT V configuration for through-hole mounting.
STM32L432KBU6TR
32-bit RISC microcontroller featuring an Arm Cortex-M4 core with FPU, operating at up to 80 MHz. This ultra-low-power device offers 128 Kbytes of FLASH memory and 65 Kbytes of RAM, with 26 I/O lines. Includes USB connectivity, PWM channels, ADC, DAC, and DMA. Designed for industrial applications with a temperature range of -40°C to 85°C and a supply voltage from 1.71V to 3.6V. Packaged in a 32-terminal S-XQCC-N32 (5x5mm) JEDEC package.
M24C64-RMN6TP
64 Kbit serial I²C bus EEPROM for surface mount applications. Features 8K x 8 organization with a 1MHz maximum frequency and 400kHz maximum I²C interface speed. Offers a wide operating voltage range from 1.8V to 5.5V, with a typical 5V supply. Access times are as fast as 450ns, and it supports write protection. Packaged in SOIC, this RoHS compliant memory component operates between -40°C and 85°C.
TDA7498E
160W+160W dual BTL class D audio amplifier
LM358N
Dual operational amplifier IC featuring a 1.1MHz bandwidth and 0.6V/µs slew rate. This general-purpose op-amp offers a 100dB voltage gain and 70dB common mode rejection ratio, with a low input bias current of 150nA. Designed for through-hole mounting in a DIP package, it operates from a wide supply voltage range of 1.5V to 30V, with a typical operating supply current of 700µA. Suitable for dual supply operation up to ±15V.
L293B
Four-channel push-pull driver IC for brushed DC motors. Features a parallel interface and operates from a 4.5V to 36V supply voltage, with a typical operating voltage of 24V. Delivers up to 2A maximum output current per channel. Packaged in a DIP through-hole mount, measuring 20mm in length, 7.1mm in width, and 5.1mm in height. RoHS compliant and lead-free.
About TS912IDT
The Stmicroelectronics TS912IDT Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Dual operational amplifier featuring CMOS inputs for low power consumption. This general-purpose op amp offers a 1.4MHz bandwidth and a 1MHz gain bandwidth product. It operates from a dual supply voltage range of 1.35V to 8V, with a maximum single supply of 16V. The surface-mount SOIC package houses two amplifiers, each capable of 75mA output current, and boasts a low input bias current of 150pA.. Key parameters include Amplifier Type: GENERAL PURPOSE, Bandwidth: 1.4MHz, Common Mode Rejection Ratio: 60dB, Dual Supply Voltage: 5V, and Gain Bandwidth Product: 1MHz. TS912IDT is manufactured by Stmicroelectronics as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Stmicroelectronics
- Category
- Semiconductors
- File Size
- 1 MB
Ask AI Assistant
Ask questions about TS912IDT specifications
Click to ask a quick question:
Parameters
| Amplifier Type | GENERAL PURPOSE |
| Bandwidth | 1.4MHz |
| Common Mode Rejection Ratio | 60dB |
| Dual Supply Voltage | 5V |
| Gain Bandwidth Product | 1MHz |
| Height | 1.25mm |
| Input Bias Current | 150pA |
| Input Offset Voltage-Max | 10mV |
| Input Offset Voltage (Vos) | 10mV |
| Lead Free | Lead Free |
| Length | 4.9mm |
| Max Dual Supply Voltage | 8V |
| Max Operating Temperature | 125°C |
| Max Supply Voltage | 16V |
| Min Dual Supply Voltage | 1.35V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 2.7V |
| Mount | Surface Mount |
| Number of Amplifiers | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Number of Elements | 2 |
| Operating Supply Current | 400uA |
| Operating Supply Voltage | 8V |
| Output Current | 40mA |
| Output Current per Channel | 75mA |
| Package/Case | SOIC |
| Package Quantity | 2500 |
| Packaging | Tape and Reel |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 0.8V/µs |
| Slew Rate-Nom | 1.3V/µs |
| Supply Current | 700uA |
| Technology | CMOS |
| TME | 1,5621$1.12$0.948$0.857$0.563pcsView offer |
| Unity Gain Bandwidth Product | 1MHz |
| Voltage Gain | 92.04dB |
| Width | 3.9mm |