TDA2040
Single-channel, 22W audio amplifier IC featuring a 100kHz bandwidth and 80dB voltage gain. Designed for dual supply operation with a voltage range of 4.5V to 18V (max 20V) and a quiescent current of 100mA. Delivers up to 4A output current and 22W output power into a 4 Ohm load impedance. Through-hole mounting package with a maximum power dissipation of 25W. Operates across a wide temperature range of -40°C to 150°C.
Similar Components
TDA7375AV
Dual SE or dual BTL output power amplifier with stand-by input and clip detection
BCP56-16
NPN Bipolar Junction Transistor (BJT) for low-power applications. Features an 80V Collector-Emitter Voltage (VCEO) and 1A Max Collector Current. Offers a 500mV Collector-Emitter Saturation Voltage and 40 minimum hFE. Packaged in a SOT-223 surface-mount case, this RoHS compliant component operates from -65°C to 150°C with 1.6W power dissipation.
L298P
Dual full bridge driver IC for brushed motors, featuring 2 channels and 4 outputs. Operates with a supply voltage range of 4.8V to 46V, delivering up to 2A output current per channel. Integrated over-temperature fault protection and logic interface. Surface mountable in a SOIC package, with a low drain-to-source resistance of 930mR. RoHS compliant and lead-free.
M24C02-WMN6TP
2 Kbit serial I²C bus EEPROM for surface mount applications. Features a 2-wire serial interface with a maximum frequency of 400kHz and an access time of 900ns. Operates with a supply voltage range of 2.5V to 5.5V, supporting 5V nominal operation. This RoHS compliant memory component is organized as 256 x 8 bits and includes write protection. Packaged in a compact SOIC case with dimensions of 4.9mm length, 3.9mm width, and 1.25mm height.
NE555N
DIP-packaged, through-hole mount **timer IC** operating at 500kHz. Features a single channel and timer/counter, with a maximum operating temperature of 70°C and a minimum of 0°C. Supplies 200mA output current, with a minimum supply voltage of 4.5V and a maximum of 16V. This RoHS compliant component has a supply current of 10mA.
TS922IDT
Dual-channel, general-purpose operational amplifier featuring a 4MHz bandwidth and 1.3V/µs slew rate. Delivers excellent audio performance with low distortion (0.005%) and a voltage gain of 106.02dB. Operates from a 2.7V to 12V supply range with a typical supply current of 2mA. Housed in a lead-free SOIC package for surface mounting, this BICMOS technology amplifier offers a 60dB common mode rejection ratio and 80mA output current per channel.
About TDA2040
The Stmicroelectronics TDA2040 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Single-channel, 22W audio amplifier IC featuring a 100kHz bandwidth and 80dB voltage gain. Designed for dual supply operation with a voltage range of 4.5V to 18V (max 20V) and a quiescent current of 100mA. Delivers up to 4A output current and 22W output power into a 4 Ohm load impedance. Through-hole mounting package with a maximum power dissipation of 25W. Operates across a wide temperature range of -40°C to 150°C.. Key parameters include Amplifier Type: POWER, Bandwidth: 100kHz, Dual Supply Voltage: 18V, Gain: 80dB, and Height: 9.2mm. TDA2040 is manufactured by Stmicroelectronics as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Stmicroelectronics
- Category
- Semiconductors
Ask AI Assistant
Ask questions about TDA2040 specifications
Click to ask a quick question:
Parameters
| Amplifier Type | POWER |
| Bandwidth | 100kHz |
| Dual Supply Voltage | 18V |
| Gain | 80dB |
| Height | 9.2mm |
| Input Bias Current | 1uA |
| Input Offset Voltage (Vos) | 20mV |
| Lead Free | Lead Free |
| Length | 10.4mm |
| Load Impedance | 4R |
| Max Dual Supply Voltage | 20V |
| Max Operating Temperature | 150°C |
| Max Output Current | 4A |
| Max Output Power | 22W |
| Max Power Dissipation | 25W |
| Max Supply Voltage | 20V |
| Min Dual Supply Voltage | 4.5V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 2.5V |
| Mount | Through Hole |
| Number of Amplifiers | 1 |
| Number of Channels | 1 |
| Output Current | 4A |
| Output Power | 22W |
| Package Quantity | 50 |
| Packaging | Rail/Tube |
| Power Dissipation | 25W |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Quiescent Current | 100mA |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Supply Type | Dual |
| Termination | Through Hole |
| Voltage | 18V |
| Voltage Gain | 80dB |
| Width | 4.8mm |