AD623
Single-supply, rail-to-rail instrumentation amplifier featuring a 100kHz bandwidth and 800kHz -3dB bandwidth. Offers a high Common Mode Rejection Ratio (CMRR) of 90dB and a low input bias current of 17nA. Input offset voltage is a precise 25uV with an input resistance of 2GR. Operates from a minimum supply voltage of 2.5V up to a maximum of 12V, with a typical supply current of 550uA. Packaged in a SOIC case for surface mounting, this component is RoHS compliant and suitable for operation across a wide temperature range of -40°C to 85°C.
Similar Components
AD623BRZ-RL
Instrumentation Amplifier, 800kHz BW, 25uV Vos, SOIC, SM
OP37GPZ
Precision operational amplifier featuring a 63MHz bandwidth and 17V/µs slew rate. Offers low input voltage noise density of 3.8nV/sqrt Hz and minimal input offset voltage of 30µV. Supports dual supply operation from ±4V to ±18V, with a maximum of ±22V. Achieves high common mode rejection and power supply rejection ratios of 114dB. Packaged in a 1-channel, 1-amplifier configuration with a 63MHz gain bandwidth product.
AD8541ARTZ-REEL7
General-purpose, single operational amplifier featuring rail-to-rail output and a 1MHz gain bandwidth product. This CMOS amplifier offers a low input bias current of 4pA and an input offset voltage of 6mV. Operating from a 2.7V to 5.5V supply, it provides a 30mA output current per channel and a slew rate of 0.92V/µs. Packaged in a SOT-23-5, this RoHS compliant component operates within a temperature range of -40°C to 125°C.
AD797ARZ
High-performance operational amplifier featuring ultralow distortion and ultralow noise. This single-channel, general-purpose op amp offers a 110MHz bandwidth and a 450MHz unity gain bandwidth product. Key specifications include a 20V/µs slew rate, 800ns settling time, and 50mA output current per channel. It operates with dual supply voltages from ±5V to ±9V (up to ±18V max) and boasts a 130dB common mode rejection ratio and power supply rejection ratio. The component is housed in a 5mm x 4mm x 1.5mm package with tin matte contact plating.
AD8226
Low cost instrumentation amplifier provides rail-to-rail output operation and uses one external resistor to set gains from 1 to 1000. The amplifier operates from 2.2 V to 36 V single supplies or ±1.35 V to ±18 V dual supplies. It supports inputs below the negative rail and includes input protection beyond the supplies for real-world sensor interfaces. The device is specified from -40°C to +125°C and is offered in 8-lead SOIC and MSOP package options.
ADUM1201ARZ-RL7
Dual-channel digital isolator featuring unidirectional channel type and 25Mbps data rate. Operates with a supply voltage range of 2.7V to 5.5V, consuming a maximum of 600uA. Offers 35mA output current and a propagation delay of 150ns with 40ns pulse width distortion. Approved by UL, CSA, and VDE, this RoHS compliant component is supplied in tape and reel packaging.
About AD623
The Analog Devices AD623 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Single-supply, rail-to-rail instrumentation amplifier featuring a 100kHz bandwidth and 800kHz -3dB bandwidth. Offers a high Common Mode Rejection Ratio (CMRR) of 90dB and a low input bias current of 17nA. Input offset voltage is a precise 25uV with an input resistance of 2GR. Operates from a minimum supply voltage of 2.5V up to a maximum of 12V, with a typical supply current of 550uA. Packaged in a SOIC case for surface mounting, this component is RoHS compliant and suitable for operation across a wide temperature range of -40°C to 85°C.. Key parameters include -3db Bandwidth: 800kHz, Bandwidth: 100kHz, Common Mode Rejection Ratio: 90dB, Contact Plating: Tin, Matte, and Gain Bandwidth Product: 800kHz. AD623 is manufactured by Analog Devices as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Analog Devices
- Category
- Semiconductors
- File Size
- 1 MB
Ask AI Assistant
Ask questions about AD623 specifications
Click to ask a quick question:
Parameters
| -3db Bandwidth | 800kHz |
| Bandwidth | 100kHz |
| Common Mode Rejection Ratio | 90dB |
| Contact Plating | Tin, Matte |
| Gain Bandwidth Product | 800kHz |
| Input Bias Current | 17nA |
| Input Offset Voltage (Vos) | 25uV |
| Input Resistance | 2GR |
| Lead Free | Contains Lead |
| Max Dual Supply Voltage | 6V |
| Max Operating Temperature | 85°C |
| Max Power Dissipation | 650mW |
| Max Supply Voltage | 12V |
| Min Dual Supply Voltage | 2.5V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 2.7V |
| Mount | Surface Mount |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Elements | 1 |
| Operating Supply Current | 550uA |
| Package/Case | SOIC |
| Package Quantity | 2500 |
| Packaging | Tape and Reel |
| Power Dissipation | 650mW |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 0.3V/µs |
| Supply Current | 550uA |