LM386N-1
Single-channel audio amplifier IC featuring 325mW output power into an 8Ω load. Offers a 46dB voltage gain and a 300kHz unity gain bandwidth. Operates from a single supply voltage range of 4V to 12V. Maximum power dissipation is 1.25W, with a quiescent current of 8mA. Packaged in an 8-pin PDIP (DIP-8) format.
Similar Components
OPA2134PA
Dual operational amplifier for audio applications, featuring low distortion and low noise. This FET-input amplifier offers a gain bandwidth product of 8MHz and a high voltage gain of 120dB. It operates with dual supply voltages ranging from ±2.5V to ±18V, or a single supply from 5V to 36V. Key specifications include a 35mA output current per channel, 100pA input bias current, and a slew rate of 20V/µs. Packaged in an 8-PDIP, this RoHS compliant component is suitable for operation between -40°C and 85°C.
TL084CN
Quad JFET-input operational amplifier featuring a 3MHz bandwidth and 13V/µs slew rate. This BIFET technology device offers a 70dB common mode rejection ratio and operates with dual supply voltages from 3.5V to 18V. With four independent amplifiers in a 14-PDIP package, it boasts a low input bias current of 400pA and a nominal gain bandwidth product of 3MHz. The RoHS compliant component operates across a wide temperature range of -40°C to 125°C.
CD4051BE
Single 8:1 analog multiplexer, featuring an 8:1 multiplexer architecture with 8 inputs and 1 output. This through-hole component is housed in a 16-pin PDIP plastic dual in-line package with a 2.54mm pin pitch. Operating temperature range spans from -55°C to 125°C, with a maximum on-resistance of 1000 Ohms.
CD4518
CMOS Dual BCD Up-Counter, featuring two independent 4-bit counters. Operates with a maximum frequency of 8MHz and a supply voltage range of 3V to 18V. Offers asynchronous reset functionality and synchronous operation. Packaged in a 16-TSSOP with gold contact plating, suitable for surface mounting. Operates across a wide temperature range from -55°C to 125°C.
ADS1256
24-bit, 30 kSPS Delta-Sigma Analog-to-Digital Converter (ADC) with 8 analog inputs. Features a programmable gain amplifier (PGA), SPI interface, and bipolar polarity. Operates from 1.8V to 3.6V analog and 4.75V to 5.25V digital supply voltages. Housed in a 28-pin SSOP package with gold contact plating, suitable for surface-mount technology. RoHS compliant with a maximum power dissipation of 57mW and an operating temperature range of -40°C to 85°C.
CD4027
Dual JK-type master-slave flip-flop IC, positive edge triggered, featuring two independent elements. Operates with a 3V to 18V supply voltage, offering a maximum frequency of 24MHz. This CMOS logic component provides 4.2mA high-level and 4.2mA low-level output current, with a typical quiescent current of 4uA. Packaged in a 16-pin PDIP with gold contact plating, it supports through-hole mounting and is RoHS compliant.
About LM386N-1
The Texas Instruments LM386N-1 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Single-channel audio amplifier IC featuring 325mW output power into an 8Ω load. Offers a 46dB voltage gain and a 300kHz unity gain bandwidth. Operates from a single supply voltage range of 4V to 12V. Maximum power dissipation is 1.25W, with a quiescent current of 8mA. Packaged in an 8-pin PDIP (DIP-8) format.. Key parameters include Amplifier Type: POWER, Bandwidth: 300kHz, Input Bias Current: 250nA, Lead Free: Contains Lead, and Load Impedance: 8R. LM386N-1 is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
Ask AI Assistant
Ask questions about LM386N-1 specifications
Click to ask a quick question:
Parameters
| Amplifier Type | POWER |
| Bandwidth | 300kHz |
| Input Bias Current | 250nA |
| Lead Free | Contains Lead |
| Load Impedance | 8R |
| Max Operating Temperature | 70°C |
| Max Output Power | 325mW |
| Max Power Dissipation | 1.25W |
| Max Supply Voltage | 12V |
| Min Operating Temperature | 0°C |
| Min Supply Voltage | 4V |
| Number of Amplifiers | 1 |
| Number of Channels | 1 |
| Output Power | 325mW |
| Package/Case | P |
| Package Quantity | 40 |
| Packaging | Rail/Tube |
| Power Dissipation | 1.25W |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Quiescent Current | 8mA |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Not CompliantNo |
| RoHS Compliant | No |
| Supply Current | 4mA |
| Supply Type | Single |
| Unity Gain Bandwidth Product | 300kHz |
| Voltage Gain | 46dB |