LM386N-3
Single-channel audio power amplifier IC featuring 1W output power and 700mW maximum output power into an 8-ohm load. Offers a voltage gain of 46dB and a bandwidth of 300kHz. Operates from a single supply voltage range of 4V to 12V, with a typical supply current of 4mA. Packaged in an 8-pin DIP (PDIP8) configuration.
Similar Components
DRV8871
Automotive-grade H-bridge motor driver IC featuring integrated current sensing. Delivers up to 3.6A continuous output current with a maximum supply voltage of 45V and a minimum of 6.5V. Operates across a wide temperature range from -40°C to 125°C. Housed in an 8-pin SO PowerPAD package (R-PDSO-G8) with dual terminal positions, measuring 3.9mm in width and 4.9mm in length.
LF356
JFET input operational amplifier featuring a 5MHz bandwidth and 12V/µs slew rate. This single-channel amplifier offers a 3mV input offset voltage and 30pA input bias current, with a 1.5µs settling time. Designed for through-hole mounting in an 8-PDIP package, it operates from a dual supply voltage range of ±10V to ±18V, with a maximum supply voltage of ±36V. Key performance metrics include 80dB common mode rejection ratio and 80dB power supply rejection ratio.
OPA2134PA
Dual operational amplifier for audio applications, featuring low distortion and low noise. This FET-input amplifier offers a gain bandwidth product of 8MHz and a high voltage gain of 120dB. It operates with dual supply voltages ranging from ±2.5V to ±18V, or a single supply from 5V to 36V. Key specifications include a 35mA output current per channel, 100pA input bias current, and a slew rate of 20V/µs. Packaged in an 8-PDIP, this RoHS compliant component is suitable for operation between -40°C and 85°C.
CD4049
6-channel CMOS buffer/inverter IC, operating from 3V to 18V, features 6 independent inverting logic gates. This surface-mount device in a 16-SOIC package offers a high level output current of -5.2mA and a low level output current of 4.3mA. With a propagation delay of 50ns and a quiescent current of 4uA, it supports a wide operating temperature range of -55°C to 125°C. The component is lead-free, RoHS compliant, and utilizes gold contact plating.
CD4532BE
8-Bit Priority Encoder CMOS 3-Output 16-Pin PDIP
CD4511
The CD4511BF3A is a CMOS decoder/latch IC with 4 inputs and 7 outputs. It operates over a supply voltage range of 3V to 18V and can withstand temperatures between -55°C and 125°C. The device is packaged in a DIP-16 configuration and features a non-inverting polarity. The IC has a propagation delay of 1320ns and a turn-on delay time of 1320ns, with a quiescent current of 100uA. The CD4511BF3A is not radiation hardened and is not RoHS compliant.
About LM386N-3
The Texas Instruments LM386N-3 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Single-channel audio power amplifier IC featuring 1W output power and 700mW maximum output power into an 8-ohm load. Offers a voltage gain of 46dB and a bandwidth of 300kHz. Operates from a single supply voltage range of 4V to 12V, with a typical supply current of 4mA. Packaged in an 8-pin DIP (PDIP8) configuration.. Key parameters include Amplifier Type: POWER, Bandwidth: 300kHz, Gain Bandwidth Product: 300kHz, Input Bias Current: 250nA, and Lead Free: Contains Lead. LM386N-3 is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
Ask AI Assistant
Ask questions about LM386N-3 specifications
Click to ask a quick question:
Parameters
| Amplifier Type | POWER |
| Bandwidth | 300kHz |
| Gain Bandwidth Product | 300kHz |
| Input Bias Current | 250nA |
| Lead Free | Contains Lead |
| Load Impedance | 8R |
| Max Operating Temperature | 70°C |
| Max Output Power | 700mW |
| Max Power Dissipation | 1.25W |
| Max Supply Voltage | 12V |
| Min Operating Temperature | 0°C |
| Min Supply Voltage | 4V |
| Number of Amplifiers | 1 |
| Number of Channels | 1 |
| Output Power | 1W |
| Package/Case | P |
| Package Quantity | 40 |
| Packaging | Rail/Tube |
| Power Dissipation | 1.25W |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Not CompliantNo |
| RoHS Compliant | No |
| Supply Current | 4mA |
| Supply Type | Single |
| Unity Gain Bandwidth Product | 300kHz |
| Voltage Gain | 46dB |