LM393
Texas Instruments LM393 Linear IC SO8 2-way diff. comp.
Similar Components
NE5532DR
Dual-channel, general-purpose operational amplifier with a 10-MHz bandwidth and 9V/µs slew rate. Features 26-V output swing, 100-dB voltage gain, and 70-dB common mode rejection ratio. Operates from ±5V to ±15V dual supply voltages, with a typical supply current of 8mA. Packaged in an 8-SOIC (D) package, this lead-free, RoHS-compliant component is suitable for audio applications.
DRV8833PW
The DRV8833PW is a TSSOP-16 packaged motor driver IC with a parallel interface, designed to operate within a temperature range of -40°C to 85°C. It features a maximum output current of 2A and is RoHS compliant. The device is packaged in a lead-free TSSOP-16 package and is available in quantities of 90, packaged in rail/Tube packaging.
OPA2350UA
Dual, single-supply, rail-to-rail operational amplifier featuring 38MHz bandwidth and 22V/µs slew rate. This general-purpose amplifier offers low input bias current of 10pA and input voltage noise density of 7nV/sqrt Hz. Operating from 2.7V to 5.5V, it provides 40mA output current per channel and boasts a 122dB voltage gain. The 8-SOIC package is RoHS compliant and suitable for operation between -40°C and 85°C.
CD4511
The CD4511BF3A is a CMOS decoder/latch IC with 4 inputs and 7 outputs. It operates over a supply voltage range of 3V to 18V and can withstand temperatures between -55°C and 125°C. The device is packaged in a DIP-16 configuration and features a non-inverting polarity. The IC has a propagation delay of 1320ns and a turn-on delay time of 1320ns, with a quiescent current of 100uA. The CD4511BF3A is not radiation hardened and is not RoHS compliant.
MAX232
Dual EIA-232 driver and receiver in a 16-PDIP through-hole package. Features 2 drivers and 2 receivers for full-duplex communication, supporting data rates up to 120Kbps. Operates with a 5V supply voltage (4.5V to 5.5V) and offers a wide temperature range of -40°C to 85°C. Includes 8 I/Os with 500mV receiver hysteresis and a propagation delay of 0.5us. This RoHS compliant component is lead-free.
CD4052BE
Dual 4:1 analog multiplexer, featuring two independent 4-channel multiplexers on a single chip. This through-hole component is housed in a 16-pin PDIP plastic package with a 2.54mm pin pitch. It offers 8 inputs and 2 outputs, with a maximum on-resistance of >=1000 Ohm. Operating temperature range spans from -55 °C to 125 °C.
About LM393
The Texas Instruments LM393 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Texas Instruments LM393 Linear IC SO8 2-way diff. comp.. Key parameters include Casing: SO8, Manufacturer: Texas Instruments, Manuf. Code: TID, RoHS: Not Compliant, and Type: 2-way diff. comp.. LM393 is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
Ask AI Assistant
Ask questions about LM393 specifications
Click to ask a quick question:
Parameters
| Casing | SO8 |
| Manufacturer | Texas Instruments |
| Manuf. Code | TID |
| RoHS | Not Compliant |
| Type | 2-way diff. comp. |