TDA2050V
Single-channel audio amplifier IC delivering 50W output power into a 4-ohm load. Features a wide operating supply voltage range from 4.5V to 25V dual supply, with a maximum dual supply of 25V. Offers 80dB voltage gain and a 5A output current per channel. Designed for through-hole mounting with a Pentawatt-5 package. RoHS compliant and lead-free.
Similar Components
STM32L432KBU6TR
32-bit RISC microcontroller featuring an Arm Cortex-M4 core with FPU, operating at up to 80 MHz. This ultra-low-power device offers 128 Kbytes of FLASH memory and 65 Kbytes of RAM, with 26 I/O lines. Includes USB connectivity, PWM channels, ADC, DAC, and DMA. Designed for industrial applications with a temperature range of -40°C to 85°C and a supply voltage from 1.71V to 3.6V. Packaged in a 32-terminal S-XQCC-N32 (5x5mm) JEDEC package.
L6205D
Dual-channel brushed DC motor driver IC with a maximum supply voltage of 52V and a maximum output current of 5.6A per channel. This surface-mount device features a parallel interface and operates within a voltage range of 8V to 52V, delivering up to 2.8A continuous output current. Designed for robust performance, it boasts a maximum operating temperature of 150°C and is housed in a 20-pin SOIC package. RoHS compliant and lead-free, this power management IC is suitable for a wide array of motor control applications.
ULN2803
Eight-channel NPN Darlington transistor array for high-current switching applications. Features a 50V collector-emitter breakdown voltage and a 500mA continuous collector current per channel. Maximum power dissipation is 2.25W with a low collector-emitter saturation voltage of 1.1V. Packaged in a 22-pin PDIP for through-hole mounting, this RoHS compliant component operates from -20°C to 85°C.
L298N
Dual full bridge motor driver IC featuring bipolar technology, capable of driving brushed DC motors. Offers two independent driver channels with four outputs, supporting a maximum output current of 2A per channel and a maximum collector current of 4A. Operates with a supply voltage range from 4.8V to 46V, with a typical operating supply voltage of 42V. Includes over-temperature fault protection and a low drain-to-source resistance of 930mR. Packaged in a 15-pin MULTIWATT V configuration for through-hole mounting.
L293B
Four-channel push-pull driver IC for brushed DC motors. Features a parallel interface and operates from a 4.5V to 36V supply voltage, with a typical operating voltage of 24V. Delivers up to 2A maximum output current per channel. Packaged in a DIP through-hole mount, measuring 20mm in length, 7.1mm in width, and 5.1mm in height. RoHS compliant and lead-free.
TL072CDT
Dual low-noise operational amplifier featuring a 4MHz bandwidth and 13V/µs slew rate. This BIFET technology amplifier supports dual supply voltages from ±3V to ±18V, with a maximum supply voltage of ±36V. It offers a 70dB common mode rejection ratio and a 200pA input bias current. Packaged in an 8-pin SOIC for surface mounting, this RoHS compliant component is ideal for a wide range of amplification applications.
About TDA2050V
The Stmicroelectronics TDA2050V Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Single-channel audio amplifier IC delivering 50W output power into a 4-ohm load. Features a wide operating supply voltage range from 4.5V to 25V dual supply, with a maximum dual supply of 25V. Offers 80dB voltage gain and a 5A output current per channel. Designed for through-hole mounting with a Pentawatt-5 package. RoHS compliant and lead-free.. Key parameters include Dual Supply Voltage: 24V, Gain: 80dB, Height: 9.2mm, Input Bias Current: 500nA, and Input Offset Voltage (Vos): 15mV. TDA2050V is manufactured by Stmicroelectronics as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Stmicroelectronics
- Category
- Semiconductors
Ask AI Assistant
Ask questions about TDA2050V specifications
Click to ask a quick question:
Parameters
| Dual Supply Voltage | 24V |
| Gain | 80dB |
| Height | 9.2mm |
| Input Bias Current | 500nA |
| Input Offset Voltage (Vos) | 15mV |
| Lead Free | Lead Free |
| Length | 10.4mm |
| Load Impedance | 4R |
| Max Dual Supply Voltage | 25V |
| Max Operating Temperature | 150°C |
| Max Output Power | 35W |
| Max Power Dissipation | 25W |
| Min Dual Supply Voltage | 4.5V |
| Min Operating Temperature | -40°C |
| Mount | Through Hole |
| Nominal Input Voltage | 15V |
| Number of Channels | 1 |
| Operating Supply Voltage | 25V |
| Output Current | 5A |
| Output Current per Channel | 5A |
| Output Power | 50W |
| Package Quantity | 50 |
| Packaging | Rail/Tube |
| Power Dissipation | 25W |
| Power Supply Rejection Ratio (PSRR) | 45dB |
| Quiescent Current | 30mA |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 8V/µs |
| Supply Current | 90mA |
| Supply Type | Dual |
| Voltage Gain | 80dB |
| Width | 4.8mm |