INA128PA
Single-channel instrumentation amplifier featuring a 1.3MHz bandwidth and 110dB common-mode rejection ratio. Offers a wide dual supply voltage range from ±2.25V to ±18V, with a maximum supply voltage of 36V. Key specifications include 25µV input offset voltage, 10nA input bias current, and 8nV/√Hz input voltage noise density. This amplifier operates with a 700µA quiescent current and provides a 4V/µs slew rate, housed in an 8-pin PDIP package.
Similar Components
CD4017
CMOS Hex D-Type Flip-Flop, featuring 6 bits per element, operates with positive edge clock triggering. This surface mount device offers a maximum operating frequency of 16MHz and a propagation delay of 100ns. It supports a wide supply voltage range from 3V to 18V, with a low quiescent current of 4uA. The component boasts gold contact plating and is RoHS compliant, functioning across an extended temperature range of -55°C to 125°C.
NE555D
Standard Timer Single 0°C 70°C 8-Pin SOIC Tube
TLC5916
The TLC5916 is a constant-current LED sink driver designed to work alone or be cascaded. It contains an 8-bit shift register and data latches that convert serial input data into parallel output format. The device features eight regulated-current ports that provide uniform and constant current for driving LEDs with a wide range of forward voltage variations. It includes an external resistor to set the output current from 5 mA to 120 mA and provides excellent output current accuracy.
ADS1256
24-bit, 30 kSPS Delta-Sigma Analog-to-Digital Converter (ADC) with 8 analog inputs. Features a programmable gain amplifier (PGA), SPI interface, and bipolar polarity. Operates from 1.8V to 3.6V analog and 4.75V to 5.25V digital supply voltages. Housed in a 28-pin SSOP package with gold contact plating, suitable for surface-mount technology. RoHS compliant with a maximum power dissipation of 57mW and an operating temperature range of -40°C to 85°C.
MAX232N
Dual transmitter/receiver bus transceiver for RS-232 communication. Features two transmitters and two receivers, supporting full-duplex operation. Operates with a 5V supply voltage (4.5V to 5.5V) and offers a data rate of 120Kbps. Includes ESD protection and is RoHS compliant. Packaged in a 16-pin PDIP with through-hole mounting.
TL072CD
Dual low-noise JFET-input operational amplifier featuring a 3MHz bandwidth and 3MHz gain bandwidth product. This general-purpose op-amp offers a 13V/µs slew rate and 106.02dB voltage gain. It operates with dual supply voltages ranging from 3.5V to 18V, with a maximum dual supply voltage of 18V. The component boasts a low input bias current of 200pA and an input offset voltage of 3mV. Housed in a lead-free 8-SOIC package (D), it operates across a wide temperature range of -40°C to 85°C.
About INA128PA
The Texas Instruments INA128PA Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Single-channel instrumentation amplifier featuring a 1.3MHz bandwidth and 110dB common-mode rejection ratio. Offers a wide dual supply voltage range from ±2.25V to ±18V, with a maximum supply voltage of 36V. Key specifications include 25µV input offset voltage, 10nA input bias current, and 8nV/√Hz input voltage noise density. This amplifier operates with a 700µA quiescent current and provides a 4V/µs slew rate, housed in an 8-pin PDIP package.. Key parameters include -3db Bandwidth: 1.3MHz, Amplifier Type: INSTRUMENTATION AMPLIFIER, Bandwidth: 1.3MHz, Common Mode Rejection Ratio: 110dB, and Dual Supply Voltage: 15V. INA128PA is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
- File Size
- 3 MB
Ask AI Assistant
Ask questions about INA128PA specifications
Click to ask a quick question:
Parameters
| -3db Bandwidth | 1.3MHz |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Bandwidth | 1.3MHz |
| Common Mode Rejection Ratio | 110dB |
| Dual Supply Voltage | 15V |
| Gain Bandwidth Product | 1.3MHz |
| Height | 4.57mm |
| Input Bias Current | 10nA |
| Input Offset Voltage (Vos) | 25uV |
| Input Resistance | 100GR |
| Input Voltage Noise Density | 8nV/sqrt Hz |
| Lead Free | Lead Free |
| Length | 9.81mm |
| Max Dual Supply Voltage | 18V |
| Max Operating Temperature | 125°C |
| Max Supply Voltage | 36V |
| Min Dual Supply Voltage | 2.25V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 4.5V |
| Number of Amplifiers | 3 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Elements | 3 |
| Operating Supply Current | 700uA |
| Output Current per Channel | 15mA |
| Package/Case | P |
| Package Quantity | 50 |
| Packaging | Rail/Tube |
| Quiescent Current | 700uA |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 4V/µs |
| Supply Current | 700uA |
| Voltage Gain | 80dB |
| Weight | 0.018646oz |
| Width | 6.35mm |