Rf Wireless
BG22
Cable gland M20 x 1.5 5. . .14 mm 9 mm Polyamide grey, RAL 7035 IP 68 up to 15 bars, BG220 PA, Pflitsch
BG220PA
Cable gland M20 x 1.5 5. . .14 mm 9 mm Polyamide grey, RAL 7035 IP 68 up to 15 bars, BG220 PA, Pflitsch
BL602
BL602
CC1101
RF and Wireless IC for cellular applications, featuring a 300MHz to 928MHz frequency range and a maximum data rate of 600Kbps. This surface mount component offers a sensitivity of -116dBm and a maximum output power of 10dBm. Operating with a supply voltage between 1.8V and 3.6V, it utilizes an SPI interface and consumes 17.1mA during receiving and 34.2mA during transmitting. The VQFN package measures 4mm x 4mm x 0.85mm and operates within a temperature range of -40°C to 85°C.
CC1101RGPR
Surface mount RF transceiver supporting ASK, FSK, GFSK, OOK, and MSK modulation. Features a data rate up to 600Kbps and an output power of 12dBm, with a sensitivity of -116dBm. Operates across a frequency range up to 928MHz, powered by a supply voltage between 1.8V and 3.6V. Includes a single receiver and transmitter, with SPI interface, housed in a 20-pin VQFN EP package with gold contact plating.
CC1101RTK
RF Transceiver IC, 300-928MHz, 600Kbps, SPI, VQFN, 10dBm
CC2500
Specialty telecom circuit featuring a 2.4GHz frequency range with a bandwidth up to 2.4835GHz. Supports data rates of 500Kbps and offers multiple modulation schemes including 2-FSK, ASK, GFSK, MSK, and OOK. Operates with an SPI interface, a supply voltage range of 1.8V to 3.6V, and a sensitivity of -104dBm. Packaged in a 4x4mm VQFN EP with gold contact plating, this surface mount component is RoHS compliant.
CC2500RTKR
2.4GHz RF Transceiver IC, VQFN EP package with gold contact plating. Features SPI interface, 500Kbps data rate, and -104dBm sensitivity. Operates with 1.8V to 3.6V supply, drawing 19.6mA receive and 21.5mA transmit current. Offers 1dBm output power and a temperature range of -40°C to 85°C. Surface mountable, RoHS compliant, and supplied on tape and reel.
CC2500-RTY1
2.4GHz RF Transceiver IC, SPI, VQFN EP, 500Kbps, 1.8-3.6V
CC2530F256RHAR
802.15.4/ZigBee/RF4CE System-on-Chip (SoC) operating at 2.4GHz with a data rate of 250Kbps. Features 256KB FLASH memory, 8KB RAM, and an 8051 core architecture. Offers 21 GPIOs, SPI, USART, UART, and 2-Wire interfaces. Operates from 2V to 3.6V with a receiving current of 24.3mA and transmitting current of 33.5mA. Packaged in a 40-pin VQFN with gold contact plating, suitable for surface mounting.
CC2541
KIT EVAL MODULE FOR CC2541
CC2541EMK
KIT EVAL MODULE FOR CC2541
CC2591
LNA/PA RF Front End 4.8dB 22dB 16-Pin VQFN EP T/R
CC2591RGVR
LNA/PA RF Front End 4.8dB 22dB 16-Pin VQFN EP T/R
CC2652R1FRGZR
32-bit Arm Cortex-M4F multiprotocol wireless microcontroller featuring 352kB Flash and 81920 bytes RAM. Operates across an industrial temperature range of -40°C to 105°C with a supply voltage from 1.8V to 3.8V. This 48-terminal QUAD package device offers 31 I/O lines, PWM channels, ADC, and DMA channels.
ESP32-C3-FH4
Low-power Wi-Fi and Bluetooth Low Energy microcontroller SoC integrates a 32-bit single-core RISC-V processor running up to 160 MHz. The device supports 2.4 GHz IEEE 802.11b/g/n Wi-Fi with 20 MHz and 40 MHz bandwidth and Bluetooth 5 LE data rates from 125 Kbps to 2 Mbps. On-chip resources include 400 KB SRAM, 384 KB ROM, 8 KB RTC SRAM, 4096-bit eFuse memory, security accelerators, and 22 configurable GPIOs. The base chip is supplied in a 32-pin 5 mm by 5 mm QFN package and operates from 3.0 V to 3.6 V over a -40 °C to 105 °C ambient range.
ESP32-C3-Mini-1
General-purpose 2.4 GHz Wi-Fi and Bluetooth LE MCU module integrates a single-core 32-bit RISC-V processor running up to 160 MHz. The module includes an on-board PCB antenna, up to 15 GPIOs, and common peripherals including SPI, UART, I2C, I2S, LED PWM, TWAI, USB serial/JTAG, ADC, timers, and a temperature sensor. It operates from a 3.0 V to 3.6 V supply and is available in ambient-temperature variants rated for -40 °C to 85 °C or -40 °C to 105 °C. The module measures 13.2 mm by 16.6 mm by 2.4 mm and carries RoHS and REACH green certification.
ESP32-C6-WROOM-1
Wireless MCU module supports 2.4 GHz Wi-Fi 6, Bluetooth LE, Zigbee 3.0 and Thread connectivity. The module is built around a single-core 32-bit RISC-V microprocessor running up to 160 MHz and includes 4 MB Quad SPI flash. It uses an on-board PCB antenna and exposes 23 GPIOs with interfaces including SPI, UART, I2C, I2S, USB Serial/JTAG, ADC and PWM. Operation is specified from 3.0 V to 3.6 V and from -40 °C to 85 °C ambient temperature. The module is rated MSL 3 and has RoHS and REACH green certification.
ESP32-H2-WROOM-1-N4
Low-power wireless SoC integrates a 32-bit RISC-V single-core processor with Bluetooth Low Energy and IEEE 802.15.4 radios. The device supports Thread, Zigbee 3.0, Matter, Bluetooth mesh, and Bluetooth LE long range operation. It includes 128 KB ROM, 320 KB SRAM, 4 KB low-power memory, 16 KB cache, and 2 MB or 4 MB in-package Quad SPI flash. The QFN32 package operates from a 3.0 V to 3.6 V supply over a -40 °C to 105 °C ambient temperature range. Peripheral resources include 19 programmable GPIOs, SPI, UART, I2C, I2S, USB Serial/JTAG, ADC, PWM, RMT, TWAI, and security accelerators.
ESP32-S2-WROOM
2.4 GHz Wi-Fi MCU module integrates an ESP32-S2 single-core Xtensa LX7 microprocessor running up to 240 MHz. It supports IEEE 802.11 b/g/n operation from 2412 to 2484 MHz with a data rate up to 150 Mbps. The module includes 4 MB SPI flash, 37 GPIOs, a PCB antenna, and a 40 MHz crystal oscillator. It operates from a 3.0 to 3.6 V supply over a -40 to 85 °C ambient temperature range and measures 18.0 × 31.0 × 3.3 mm. RoHS and REACH green certifications are specified.