ESP32-C3-Mini-1
General-purpose 2.4 GHz Wi-Fi and Bluetooth LE MCU module integrates a single-core 32-bit RISC-V processor running up to 160 MHz. The module includes an on-board PCB antenna, up to 15 GPIOs, and common peripherals including SPI, UART, I2C, I2S, LED PWM, TWAI, USB serial/JTAG, ADC, timers, and a temperature sensor. It operates from a 3.0 V to 3.6 V supply and is available in ambient-temperature variants rated for -40 °C to 85 °C or -40 °C to 105 °C. The module measures 13.2 mm by 16.6 mm by 2.4 mm and carries RoHS and REACH green certification.
Similar Components
ESP32-WROOM-32UE
Wireless module integrates an ESP32 dual-core 32-bit LX6 microprocessor for 2.4 GHz Wi-Fi, Bluetooth BR/EDR, and Bluetooth LE connectivity. The module supports up to 240 MHz CPU operation, up to 26 GPIOs, and common embedded interfaces including UART, SPI, SDIO, I2C, I2S, ADC, DAC, PWM, and TWAI. External antenna connection is provided through a compatible U.FL, MHF I, or AMC connector. Supply operation is specified from 3.0 V to 3.6 V, with operating ambient temperature options from -40 °C to 85 °C or -40 °C to 105 °C depending on suffix. Green certification includes REACH and RoHS compliance.
ESP32-S2-WROOM
2.4 GHz Wi-Fi MCU module integrates an ESP32-S2 single-core Xtensa LX7 microprocessor running up to 240 MHz. It supports IEEE 802.11 b/g/n operation from 2412 to 2484 MHz with a data rate up to 150 Mbps. The module includes 4 MB SPI flash, 37 GPIOs, a PCB antenna, and a 40 MHz crystal oscillator. It operates from a 3.0 to 3.6 V supply over a -40 to 85 °C ambient temperature range and measures 18.0 × 31.0 × 3.3 mm. RoHS and REACH green certifications are specified.
ESP32-S3-WROOM-1
Wi-Fi and Bluetooth LE MCU module integrates an ESP32-S3 series dual-core Xtensa LX7 processor running up to 240 MHz. The module provides 8 MB Quad SPI flash, 8 MB Octal SPI PSRAM, 384 KB ROM, 512 KB SRAM, and 16 KB RTC SRAM. Wireless connectivity includes 2.4 GHz 802.11b/g/n Wi-Fi up to 150 Mbps and Bluetooth 5 LE with 125 Kbps to 2 Mbps PHY rates. The PCB-antenna module operates from a 3.0 V to 3.6 V supply over a -40 °C to 65 °C ambient range and measures 18.0 mm by 25.5 mm by 3.1 mm.
ESP32-WROOM-32E
The 2.4 GHz Wi-Fi and Bluetooth LE MCU module integrates an Xtensa dual-core 32-bit LX6 microprocessor running up to 240 MHz. It supports IEEE 802.11b/g/n, Bluetooth v4.2 BR/EDR, and Bluetooth LE with 2412 MHz to 2484 MHz operation. The module provides up to 26 GPIOs, rich digital and analog peripherals, a 40 MHz crystal oscillator, Quad SPI flash options from 4 MB to 16 MB, and optional 2 MB PSRAM on supported variants. It operates from a 3.0 V to 3.6 V supply across -40 °C to 85 °C or -40 °C to 105 °C versions and uses an on-board PCB antenna. The module measures 18.0 mm by 25.5 mm by 3.1 mm and is REACH/RoHS green certified.
ESP32-C3-FH4
Low-power Wi-Fi and Bluetooth Low Energy microcontroller SoC integrates a 32-bit single-core RISC-V processor running up to 160 MHz. The device supports 2.4 GHz IEEE 802.11b/g/n Wi-Fi with 20 MHz and 40 MHz bandwidth and Bluetooth 5 LE data rates from 125 Kbps to 2 Mbps. On-chip resources include 400 KB SRAM, 384 KB ROM, 8 KB RTC SRAM, 4096-bit eFuse memory, security accelerators, and 22 configurable GPIOs. The base chip is supplied in a 32-pin 5 mm by 5 mm QFN package and operates from 3.0 V to 3.6 V over a -40 °C to 105 °C ambient range.
ESP32-H2-WROOM-1-N4
Low-power wireless SoC integrates a 32-bit RISC-V single-core processor with Bluetooth Low Energy and IEEE 802.15.4 radios. The device supports Thread, Zigbee 3.0, Matter, Bluetooth mesh, and Bluetooth LE long range operation. It includes 128 KB ROM, 320 KB SRAM, 4 KB low-power memory, 16 KB cache, and 2 MB or 4 MB in-package Quad SPI flash. The QFN32 package operates from a 3.0 V to 3.6 V supply over a -40 °C to 105 °C ambient temperature range. Peripheral resources include 19 programmable GPIOs, SPI, UART, I2C, I2S, USB Serial/JTAG, ADC, PWM, RMT, TWAI, and security accelerators.
About ESP32-C3-Mini-1
The Espressif Systems ESP32-C3-Mini-1 Rf Wireless datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: General-purpose 2.4 GHz Wi-Fi and Bluetooth LE MCU module integrates a single-core 32-bit RISC-V processor running up to 160 MHz. The module includes an on-board PCB antenna, up to 15 GPIOs, and common peripherals including SPI, UART, I2C, I2S, LED PWM, TWAI, USB serial/JTAG, ADC, timers, and a temperature sensor. It operates from a 3.0 V to 3.6 V supply and is available in ambient-temperature variants rated for -40 °C to 85 °C or -40 °C to 105 °C. The module measures 13.2 mm by 16.6 mm by 2.4 mm and carries RoHS and REACH green certification.. Key parameters include Antenna: On-board PCB antenna, Bluetooth LE channel frequency: 2402 to 2480MHz, Bluetooth LE data rates: 0.125, 0.5, 1, 2Mbps, ESD HBM rating: ±2000V, and Flash: Up to 8 in chip packageMB. ESP32-C3-Mini-1 is manufactured by Espressif Systems as part of their Rf Wireless product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Espressif Systems
- Category
- Rf Wireless
- File Size
- 1 MB
Ask AI Assistant
Ask questions about ESP32-C3-Mini-1 specifications
Click to ask a quick question:
Parameters
| Antenna | On-board PCB antenna |
| Bluetooth LE channel frequency | 2402 to 2480MHz |
| Bluetooth LE data rates | 0.125, 0.5, 1, 2Mbps |
| ESD HBM rating | ±2000V |
| Flash | Up to 8 in chip packageMB |
| GPIO count | Up to 15 |
| Module dimensions | 13.2 × 16.6 × 2.4mm |
| Moisture sensitivity level | MSL 3 |
| Operating ambient temperature | -40 to 85 or -40 to 105, variant dependent°C |
| Processor core | 32-bit RISC-V single-core |
| Processor frequency | Up to 160MHz |
| REACH | Compliant |
| RoHS | Compliant |
| ROM | 384KB |
| RTC SRAM | 8KB |
| SRAM | 400KB |
| Supply voltage | 3.0 to 3.6V |
| Wi-Fi channel center frequency | 2412 to 2484MHz |
| Wi-Fi data rate | Up to 150Mbps |
| Wireless standard | IEEE 802.11b/g/n, Bluetooth LE 5 |