OPA1656IDR
SoundPlus™ ultra-low noise and distortion, Burr-Brown™ audio operational amplifier 8-SOIC -40 to 125
Similar Components
CD4543
CMOS BCD-to-Seven-Segment Latch/Decoder/Driver for Liquid-Crystal Displays. Features 4 input lines, 7 output lines, and a 400ns propagation delay. Operates with a minimum supply voltage of 3V and a maximum of 18V, supporting a bandwidth of 8MHz. This demultiplexer and decoder IC is designed for LCD displays and operates across a temperature range of -55°C to 125°C. Packaged in a 16-PDIP with a non-inverting polarity.
LMV321IDBVR
Single, general-purpose operational amplifier featuring rail-to-rail output. This BICMOS amplifier offers a 1MHz gain bandwidth product and a 1V/µs slew rate, suitable for low-voltage applications from 2.7V to 5.5V. With a 100dB voltage gain and 160mA output current, it operates across a -40°C to 125°C temperature range. The SOT-23-5 surface-mount package ensures compact integration.
LM358D
Dual operational amplifier featuring a 700kHz bandwidth and 100dB voltage gain. This general-purpose op-amp offers a 0.3V/µs slew rate and operates with a wide supply voltage range from 3V to 32V. Designed for surface mounting, it comes in an 8-SOIC package with a 65dB common mode rejection ratio. The component boasts a 250nA input bias current and 7mV input offset voltage, with a typical operating supply current of 1mA.
CD4052BM96
General-purpose multiplexer/demultiplexer IC featuring 2 channels and 4:1 configuration. Operates with dual supply voltages from 2.5V to 9V or single supply from 3V to 20V, supporting up to 18V operating supply. Offers 240 Ohm on-state resistance and 25MHz bandwidth. Packaged in a 16-SOIC surface-mount case with gold contact plating, this RoHS compliant component functions across a wide temperature range of -55°C to 125°C.
ADS1015IDGSR
A precision 12-bit Analog-to-Digital Converter (ADC) offers up to four single-ended or two differential input channels, featuring an integrated programmable gain amplifier (PGA), internal reference, and oscillator for streamlined sensor measurement. It provides flexible sampling rates ranging from 128 SPS to 3300 SPS, leveraging a Sigma-Delta architecture to achieve high accuracy across PGA input ranges from ±256 mV to ±6.144 V. Designed for space-constrained applications, it communicates via an I2C-compatible interface supporting four pin-selectable addresses. Operating over a wide supply voltage range of 2.0V to 5.5V, the ADC maintains a low typical current consumption of 150 µA in continuous-conversion mode, suitable for extended operation in environments from -40°C to +125°C. Additional integrated features include a programmable comparator and single-shot mode with auto power-down, all housed in an ultra-small 10-pin VSSOP package. The ADS1015 is an ultra-small, low-power, 12-bit precision analog-to-digital converter (ADC) featuring an internal reference, oscillator, and a programmable gain amplifier (PGA). It is designed for space-constrained sensor measurement applications with an I2C-compatible interface.
CD4029
CMOS 4-bit bidirectional asynchronous binary/decade UP/Down counter. Features positive edge clock triggering, asynchronous reset, and a maximum operating frequency of 11MHz. Operates from a 3V to 18V supply voltage range with a wide temperature range of -55°C to 125°C. Packaged in a 16-pin PDIP for through-hole mounting.
About OPA1656IDR
The Texas Instruments OPA1656IDR Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: SoundPlus™ ultra-low noise and distortion, Burr-Brown™ audio operational amplifier 8-SOIC -40 to 125. Key parameters include Amplifier Type: OPERATIONAL AMPLIFIER, Average Bias Current-Max (IIB): 0.00002, Common-mode Reject Ratio-Nom: 120, Input Offset Voltage-Max: 1000, and JEDEC Package Code: R-PDSO-G8. OPA1656IDR is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
Ask AI Assistant
Ask questions about OPA1656IDR specifications
Click to ask a quick question:
Parameters
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Average Bias Current-Max (IIB) | 0.00002 |
| Common-mode Reject Ratio-Nom | 120 |
| Input Offset Voltage-Max | 1000 |
| JEDEC Package Code | R-PDSO-G8 |
| Lead Free | Yes |
| Length | 4.905 |
| Max Operating Temperature | 125 |
| Military Spec | False |
| Min Operating Temperature | -40 |
| Neg Supply Voltage Limit-Max | -20 |
| Number of Functions | 2 |
| Number of Terminals | 8 |
| REACH | Compliant |
| RoHS | Yes |
| Slew Rate-Nom | 24 |
| Supply Current-Max | 10 |
| Supply Voltage Limit-Max | 20 |
| Temperature Grade | AUTOMOTIVE |
| Terminal Position | DUAL |
| Unity Gain BW-Nom | 53000 |
| Width | 3.895 |