INA2126UAE4
Dual instrumentation amplifier with a 9kHz bandwidth and 200kHz -3dB bandwidth. Features a 74dB Common Mode Rejection Ratio, 500µV input offset voltage, and 50nA input bias current. Operates with dual supply voltages from ±1.35V to ±18V or a single supply from 2.7V to 36V. Offers 80dB voltage gain, 0.4V/µs slew rate, and 35nV/√Hz input voltage noise density. Packaged in a D surface-mount case, this RoHS compliant component is suitable for a wide operating temperature range of -40°C to 85°C.
Similar Components
LM567
Surface mount tone decoder IC featuring a 0.5MHz operating frequency and a 4.75V to 9V supply voltage range. This integrated circuit offers a 12mA operating supply current and a maximum power dissipation of 1.1W. Packaged in an 8-pin SOIC with dimensions of 4.9mm length, 3.9mm width, and 1.45mm height, it operates within a temperature range of 0°C to 70°C. The component is lead-free and RoHS compliant.
TL072CD
Dual low-noise JFET-input operational amplifier featuring a 3MHz bandwidth and 3MHz gain bandwidth product. This general-purpose op-amp offers a 13V/µs slew rate and 106.02dB voltage gain. It operates with dual supply voltages ranging from 3.5V to 18V, with a maximum dual supply voltage of 18V. The component boasts a low input bias current of 200pA and an input offset voltage of 3mV. Housed in a lead-free 8-SOIC package (D), it operates across a wide temperature range of -40°C to 85°C.
CD4069
CMOS Hex Inverter 14-CDIP -55 to 125
INA128PA
Single-channel instrumentation amplifier featuring a 1.3MHz bandwidth and 110dB common-mode rejection ratio. Offers a wide dual supply voltage range from ±2.25V to ±18V, with a maximum supply voltage of 36V. Key specifications include 25µV input offset voltage, 10nA input bias current, and 8nV/√Hz input voltage noise density. This amplifier operates with a 700µA quiescent current and provides a 4V/µs slew rate, housed in an 8-pin PDIP package.
CD4011BE
CMOS logic IC featuring four independent 2-input NAND gates. Operates with a supply voltage range of 3V to 18V, offering a high level output current of -4.2mA and a low level output current of 4.2mA. The component boasts a propagation delay of 90ns and is housed in a 14-pin PDIP package with gold contact plating, suitable for through-hole mounting. With a maximum operating temperature of 125°C and RoHS compliance, this integrated circuit is designed for reliable performance.
ADS1015IDGSR
A precision 12-bit Analog-to-Digital Converter (ADC) offers up to four single-ended or two differential input channels, featuring an integrated programmable gain amplifier (PGA), internal reference, and oscillator for streamlined sensor measurement. It provides flexible sampling rates ranging from 128 SPS to 3300 SPS, leveraging a Sigma-Delta architecture to achieve high accuracy across PGA input ranges from ±256 mV to ±6.144 V. Designed for space-constrained applications, it communicates via an I2C-compatible interface supporting four pin-selectable addresses. Operating over a wide supply voltage range of 2.0V to 5.5V, the ADC maintains a low typical current consumption of 150 µA in continuous-conversion mode, suitable for extended operation in environments from -40°C to +125°C. Additional integrated features include a programmable comparator and single-shot mode with auto power-down, all housed in an ultra-small 10-pin VSSOP package. The ADS1015 is an ultra-small, low-power, 12-bit precision analog-to-digital converter (ADC) featuring an internal reference, oscillator, and a programmable gain amplifier (PGA). It is designed for space-constrained sensor measurement applications with an I2C-compatible interface.
About INA2126UAE4
The Texas Instruments INA2126UAE4 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Dual instrumentation amplifier with a 9kHz bandwidth and 200kHz -3dB bandwidth. Features a 74dB Common Mode Rejection Ratio, 500µV input offset voltage, and 50nA input bias current. Operates with dual supply voltages from ±1.35V to ±18V or a single supply from 2.7V to 36V. Offers 80dB voltage gain, 0.4V/µs slew rate, and 35nV/√Hz input voltage noise density. Packaged in a D surface-mount case, this RoHS compliant component is suitable for a wide operating temperature range of -40°C to 85°C.. Key parameters include -3db Bandwidth: 200kHz, Amplifier Type: INSTRUMENTATION AMPLIFIER, Bandwidth: 9kHz, Common Mode Rejection Ratio: 74dB, and Dual Supply Voltage: 15V. INA2126UAE4 is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
- File Size
- 2 MB
Ask AI Assistant
Ask questions about INA2126UAE4 specifications
Click to ask a quick question:
Parameters
| -3db Bandwidth | 200kHz |
| Amplifier Type | INSTRUMENTATION AMPLIFIER |
| Bandwidth | 9kHz |
| Common Mode Rejection Ratio | 74dB |
| Dual Supply Voltage | 15V |
| Input Bias Current | 50nA |
| Input Offset Voltage (Vos) | 500uV |
| Input Resistance | 1GR |
| Input Voltage Noise Density | 35nV/sqrt Hz |
| Lead Free | Lead Free |
| Max Dual Supply Voltage | 18V |
| Max Operating Temperature | 85°C |
| Max Supply Voltage | 36V |
| Min Dual Supply Voltage | 1.35V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 2.7V |
| Number of Amplifiers | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Number of Elements | 4 |
| Operating Supply Current | 175uA |
| Output Current per Channel | 10mA |
| Package/Case | D |
| Package Quantity | 40 |
| Packaging | Rail/Tube |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Quiescent Current | 175uA |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 0.4V/µs |
| Voltage Gain | 80dB |
| Weight | 0.023492oz |