AD797ARZ
High-performance operational amplifier featuring ultralow distortion and ultralow noise. This single-channel, general-purpose op amp offers a 110MHz bandwidth and a 450MHz unity gain bandwidth product. Key specifications include a 20V/µs slew rate, 800ns settling time, and 50mA output current per channel. It operates with dual supply voltages from ±5V to ±9V (up to ±18V max) and boasts a 130dB common mode rejection ratio and power supply rejection ratio. The component is housed in a 5mm x 4mm x 1.5mm package with tin matte contact plating.
Similar Components
ADUM1200ARZ
Dual-channel digital isolator, featuring 2.5kV isolation voltage and 25Mbps data rate. This unidirectional interface IC operates from a 2.7V to 5.5V supply voltage, with a maximum input current of 10µA and output current of 35mA. Packaged in a 5mm x 4mm x 1.5mm R-type case with tin, matte contact plating, it offers a propagation delay of 150ns and pulse width distortion of 40ns. Operating temperature range is -40°C to 125°C.
AD823ARZ
Dual operational amplifier featuring rail-to-rail output and FET input. Offers a 16MHz -3dB bandwidth and 10MHz gain bandwidth product. Operates with dual supply voltages from 1.5V to 18V, or single supply from 3V to 36V. Key specifications include a 35V/µs slew rate, 5pA input bias current, and 16nV/√Hz input voltage noise density. This RoHS compliant component is packaged in a 4mm x 5mm x 1.5mm surface mount package.
AD8544ARZ
CMOS RRIO Quad General-Purpose Op Amp featuring a 1MHz gain bandwidth product and 0.92V/µs slew rate. This operational amplifier offers a 4-channel configuration with a 1MHz bandwidth and 6µs settling time. It operates from a 2.7V to 5.5V supply voltage, drawing 260µA operating supply current. Key specifications include 4pA input bias current, 6mV input offset voltage, and 42nV/√Hz input voltage noise density. The component is housed in an 8.75mm x 4mm x 1.5mm package with tin, matte contact plating.
ADUM1201ARZ-RL7
Dual-channel digital isolator featuring unidirectional channel type and 25Mbps data rate. Operates with a supply voltage range of 2.7V to 5.5V, consuming a maximum of 600uA. Offers 35mA output current and a propagation delay of 150ns with 40ns pulse width distortion. Approved by UL, CSA, and VDE, this RoHS compliant component is supplied in tape and reel packaging.
AD827JNZ
Dual operational amplifier featuring a 50MHz bandwidth and 300V/µs slew rate. This general-purpose op amp offers a 35MHz gain bandwidth product, 15nV/sqrt Hz input voltage noise density, and 3.3µA input bias current. It operates from a dual supply voltage range of 4.5V to 18V, with a typical operating supply current of 13.5mA. The component boasts a 95dB common mode rejection ratio and 72dB power supply rejection ratio, with an output current capability of 32mA per channel. Packaged in a 9.27mm x 7.24mm x 3.43mm case with tin, matte contact plating, it supports a wide operating temperature range from -55°C to 125°C.
AD620
Instrumentation amplifier offering gains from 1 to 10,000 with a 1MHz -3dB bandwidth and 800kHz bandwidth. Features low input bias current of 500pA, high input resistance of 10GR, and excellent common mode rejection ratio (CMRR) of 93dB. Operates with dual supply voltages from ±2.3V to ±18V, with a typical supply current of 900µA. This surface mount SOIC package component boasts a low input offset voltage of 30mV and a slew rate of 1.2V/µs.
About AD797ARZ
The Analog Devices AD797ARZ Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: High-performance operational amplifier featuring ultralow distortion and ultralow noise. This single-channel, general-purpose op amp offers a 110MHz bandwidth and a 450MHz unity gain bandwidth product. Key specifications include a 20V/µs slew rate, 800ns settling time, and 50mA output current per channel. It operates with dual supply voltages from ±5V to ±9V (up to ±18V max) and boasts a 130dB common mode rejection ratio and power supply rejection ratio. The component is housed in a 5mm x 4mm x 1.5mm package with tin matte contact plating.. Key parameters include -3db Bandwidth: 8MHz, Amplifier Type: GENERAL PURPOSE, Bandwidth: 110MHz, Common Mode Rejection Ratio: 130dB, and Contact Plating: Tin, Matte. AD797ARZ is manufactured by Analog Devices as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Analog Devices
- Category
- Semiconductors
- File Size
- 431 KB
Ask AI Assistant
Ask questions about AD797ARZ specifications
Click to ask a quick question:
Parameters
| -3db Bandwidth | 8MHz |
| Amplifier Type | GENERAL PURPOSE |
| Bandwidth | 110MHz |
| Common Mode Rejection Ratio | 130dB |
| Contact Plating | Tin, Matte |
| Dual Supply Voltage | 9V |
| Gain Bandwidth Product | 110MHz |
| Height | 1.5mm |
| Input Bias Current | 250nA |
| Input Capacitance | 5pF |
| Input Offset Voltage (Vos) | 40uV |
| Lead Free | Contains Lead |
| Length | 5mm |
| Max Dual Supply Voltage | 18V |
| Max Input Voltage | 18V |
| Max Operating Temperature | 85°C |
| Max Supply Voltage | 18V |
| Min Dual Supply Voltage | 5V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 5V |
| Number of Amplifiers | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Elements | 1 |
| Operating Supply Current | 10.5mA |
| Output Current per Channel | 50mA |
| Package/Case | R |
| Package Quantity | 98 |
| Packaging | Rail/Tube |
| Power Supply Rejection Ratio (PSRR) | 130dB |
| Quest | 531$12.495$9.3713———View offer |
| Quiescent Current | 10.5mA |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Settling Time | 800ns |
| Slew Rate | 20V/µs |
| Supply Current | 8mA |
| Supply Type | Dual |
| Technology | BIPOLAR |
| Unity Gain Bandwidth Product | 450MHz |
| Voltage | 15V |
| Voltage Gain | 146.02dB |
| Weight | 0.019048oz |
| Width | 4mm |