OPA2365AIDR
Dual-channel, general-purpose operational amplifier featuring a 50MHz bandwidth and 25V/µs slew rate. This CMOS device operates from a 2.2V to 5.5V supply, offering rail-to-rail output. Key specifications include a 200µV input offset voltage, 10pA input bias current, and 100dB common mode rejection ratio. The amplifier delivers 65mA output current per channel and boasts a 120dB voltage gain. Packaged in an 8-SOIC (D) for tape and reel distribution, it operates across a -40°C to 125°C temperature range and is RoHS compliant.
Similar Components
CD4040
CMOS ripple-carry binary counter/divider provides 12 counter stages built from master-slave flip-flops. The counter advances on the negative transition of each input pulse, and a high level on RESET clears all stages to zero. Schmitt-trigger action on the input-pulse line permits unlimited rise and fall times, and all inputs and outputs are buffered. The device operates from 3 V to 18 V supplies across a -55°C to 125°C operating temperature range.
CD4051BM96
16-pin SOIC analog multiplexer, featuring an 8:1 channel configuration and logic-level conversion. Operates across a wide supply voltage range from 3V to 20V, with a maximum input voltage of 20.5V and a minimum of -0.5V. This component supports a broad operating temperature range of -55°C to 125°C, suitable for military applications. The device offers a single function with dual terminal positioning and a JEDEC package code of R-PDSO-G16.
LM358
Dual, 30-V, 700-kHz operational amplifier
ADS1015IDGSR
A precision 12-bit Analog-to-Digital Converter (ADC) offers up to four single-ended or two differential input channels, featuring an integrated programmable gain amplifier (PGA), internal reference, and oscillator for streamlined sensor measurement. It provides flexible sampling rates ranging from 128 SPS to 3300 SPS, leveraging a Sigma-Delta architecture to achieve high accuracy across PGA input ranges from ±256 mV to ±6.144 V. Designed for space-constrained applications, it communicates via an I2C-compatible interface supporting four pin-selectable addresses. Operating over a wide supply voltage range of 2.0V to 5.5V, the ADC maintains a low typical current consumption of 150 µA in continuous-conversion mode, suitable for extended operation in environments from -40°C to +125°C. Additional integrated features include a programmable comparator and single-shot mode with auto power-down, all housed in an ultra-small 10-pin VSSOP package. The ADS1015 is an ultra-small, low-power, 12-bit precision analog-to-digital converter (ADC) featuring an internal reference, oscillator, and a programmable gain amplifier (PGA). It is designed for space-constrained sensor measurement applications with an I2C-compatible interface.
LM331
Boost DC/DC converter featuring adjustable output voltage up to 20V and 2A output current. Achieves 93% efficiency with a 2.5V to 7V input voltage range. Integrated op-amp and gate pulse modulation enhance performance. Surface mountable in a 4mm x 4mm WQFN package, operating from -40°C to 125°C.
CD4026
CMOS decade counter/divider featuring decoded 7-segment display outputs and display enable. Operates with positive edge clock triggering, supporting up, unidirectional counting. Offers a maximum operating frequency of 16MHz and a propagation delay of 600ns. This through-hole mount component is housed in a 16-PDIP package with gold contact plating, functioning across a supply voltage range of 3V to 18V and an extended temperature range of -55°C to 125°C.
About OPA2365AIDR
The Texas Instruments OPA2365AIDR Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Dual-channel, general-purpose operational amplifier featuring a 50MHz bandwidth and 25V/µs slew rate. This CMOS device operates from a 2.2V to 5.5V supply, offering rail-to-rail output. Key specifications include a 200µV input offset voltage, 10pA input bias current, and 100dB common mode rejection ratio. The amplifier delivers 65mA output current per channel and boasts a 120dB voltage gain. Packaged in an 8-SOIC (D) for tape and reel distribution, it operates across a -40°C to 125°C temperature range and is RoHS compliant.. Key parameters include Amplifier Type: GENERAL PURPOSE, Bandwidth: 50MHz, Common Mode Rejection Ratio: 100dB, Gain Bandwidth Product: 50MHz, and Input Bias Current: 10pA. OPA2365AIDR is manufactured by Texas Instruments as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Texas Instruments
- Category
- Semiconductors
Ask AI Assistant
Ask questions about OPA2365AIDR specifications
Click to ask a quick question:
Parameters
| Amplifier Type | GENERAL PURPOSE |
| Bandwidth | 50MHz |
| Common Mode Rejection Ratio | 100dB |
| Gain Bandwidth Product | 50MHz |
| Input Bias Current | 10pA |
| Input Offset Voltage (Vos) | 200uV |
| Lead Free | Lead Free |
| Max I/O Voltage | 200uV |
| Max Operating Temperature | 125°C |
| Max Supply Voltage | 5.5V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 2.2V |
| Number of Amplifiers | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Number of Elements | 2 |
| Operating Supply Current | 4.6mA |
| Output Current | 65mA |
| Output Current per Channel | 65mA |
| Package/Case | D |
| Package Quantity | 1 |
| Packaging | Tape and Reel |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Quest | 1,94426———$2.4851—View offer |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 25V/µs |
| Supply Current | 5mA |
| Technology | CMOS |
| Unity Gain Bandwidth Product | 50MHz |
| Voltage Gain | 120dB |