DB3
DIAC 36V 0.05mA 2-Pin DO-35 T/R
Similar Components
2N2907
PNP Silicon Bipolar Junction Transistor (BJT) in a TO-18 metal package. Features a maximum collector current of 600mA and a collector-emitter breakdown voltage of 40V. Offers a minimum DC current gain (hFE) of 75 and a transition frequency of 200MHz. Designed for through-hole mounting with a maximum power dissipation of 1.8W. Operating temperature range spans from -65°C to 150°C.
TDA2050
Single-channel audio amplifier IC delivering 50W output power into a 4-ohm load. Features a wide operating supply voltage range from 4.5V to 25V dual supply, with a maximum dual supply of 25V. Offers 80dB voltage gain and a 5A output current per channel. Designed for through-hole mounting with a Pentawatt-5 package. RoHS compliant and lead-free.
TL072CDT
Dual low-noise operational amplifier featuring a 4MHz bandwidth and 13V/µs slew rate. This BIFET technology amplifier supports dual supply voltages from ±3V to ±18V, with a maximum supply voltage of ±36V. It offers a 70dB common mode rejection ratio and a 200pA input bias current. Packaged in an 8-pin SOIC for surface mounting, this RoHS compliant component is ideal for a wide range of amplification applications.
BAT46
Axial General Purpose Signal Schottky Diode, featuring 100V repetitive reverse voltage and 150mA average rectified current. This through-hole component offers a maximum forward current of 150mA and a peak non-repetitive surge current of 750mA. With a low capacitance of 10pF and a maximum reverse leakage current of 5uA, it operates within a temperature range of -65°C to 125°C. Packaged in a DO-35 case, this RoHS compliant diode is supplied on tape and reel.
L298
Dual full bridge motor driver IC featuring bipolar technology, capable of driving brushed DC motors. Offers two independent driver channels with four outputs, supporting a maximum output current of 2A per channel and a maximum collector current of 4A. Operates with a supply voltage range from 4.8V to 46V, with a typical operating supply voltage of 42V. Includes over-temperature fault protection and a low drain-to-source resistance of 930mR. Packaged in a 15-pin MULTIWATT V configuration for through-hole mounting.
TIP142
NPN bipolar junction transistor in a TO-247 package, featuring a 100V collector-emitter voltage (VCEO) and a 10A continuous collector current. This through-hole mounted component offers a maximum power dissipation of 125W and a minimum DC current gain (hFE) of 500. Operating temperature range spans from -65°C to 150°C, with a collector-emitter saturation voltage of 2V. The device is RoHS compliant and lead-free.
About DB3
The Stmicroelectronics DB3 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: DIAC 36V 0.05mA 2-Pin DO-35 T/R. Key parameters include Contact Plating: Tin, Matte, Current Rating: 2A, Height: 2mm, Lead Free: Lead Free, and Length: 4.5mm. DB3 is manufactured by Stmicroelectronics as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Stmicroelectronics
- Category
- Semiconductors
- File Size
- 57 KB
Ask AI Assistant
Ask questions about DB3 specifications
Click to ask a quick question:
Parameters
| Contact Plating | Tin, Matte |
| Current Rating | 2A |
| Height | 2mm |
| Lead Free | Lead Free |
| Length | 4.5mm |
| Max Operating Temperature | 125°C |
| Max Output Current | 2A |
| Min Operating Temperature | -40°C |
| Mount | Through Hole |
| Package/Case | DO-35 |
| Package Quantity | 5000 |
| Packaging | Tape and Reel |
| Radiation Hardening | No |
| Reach SVHC Compliant | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Weight | 0.004833oz |
| Width | 2mm |