Sitemap - L
LM358N
Dual operational amplifier IC featuring a 1.1MHz bandwidth and 0.6V/µs slew rate. This general-purpose op-amp offers a 100dB voltage gain and 70dB common mode rejection ratio, with a low input bias current of 150nA. Designed for through-hole mounting in a DIP package, it operates from a wide supply voltage range of 1.5V to 30V, with a typical operating supply current of 700µA. Suitable for dual supply operation up to ±15V.
L130-4080002011001
LED LUXEON NEU WHITE 4000K 2SMD
LM2675
1A, 12V fixed output step-down regulator with a 6.5V to 40V input voltage range. Features 94% efficiency and operates from -40°C to 125°C. Surface mountable in an 8-SOIC package, this power management IC offers low component count and is RoHS compliant.
LM3914
10-channel dot/bar display driver IC for LCD applications. Features 10 outputs, each capable of driving up to 30mA. Operates from a 3V to 25V supply voltage with a typical supply current of 6.1mA. Packaged in a 20-PLCC surface-mount format, this lead-free and RoHS-compliant component offers a maximum power dissipation of 1.365W and operates within a temperature range of 0°C to 70°C.
L07R5000H1D1
Ledtech L07R5000H1D1, LxxR5000H Series Red LED, 660 nm 5mm (T-1 3/4), Round Lens Through Hole package
LFXTAL011300BULK
CRYSTAL 4.0000MHZ 30PF SMD
LI-5M05CMAF
Compact Size Camera Modules From VGA Resolution to 5 Mega-Pixel Resolutions
LM2588S-ADJ/NOPB
Adjustable Flyback/Boost Regulator, 4-40V IN, 5A OUT, TO-263
LI-OV580-STEREO
USB 3.0 Super Speed Camera
LM675T/NOPB
Power Op Amp, 5.5MHz BW, 3A Out, TO-220, 8-30V Dual Supply
LM317T
Positive adjustable linear voltage regulator IC with an output current of 1.5A and an adjustable output voltage range from 1.2V to 37V. Features a maximum input voltage of 40V and a minimum input voltage of 4.2V, with a Power Supply Rejection Ratio (PSRR) of 80dB. Operates within a temperature range of 0°C to 125°C and is housed in a TO-220 package. This lead-free, RoHS compliant component is ideal for power management applications.
LH7A404N0E000B1A
Tray.spq 90.MOQ 900. Micro Controller
LTC4309CGN#PBF
SSOP Surface Mount IC, 0°C to 70°C, 2.3V to 5.5V, Lead Free
LM386N-3
Single-channel audio power amplifier IC featuring 1W output power and 700mW maximum output power into an 8-ohm load. Offers a voltage gain of 46dB and a bandwidth of 300kHz. Operates from a single supply voltage range of 4V to 12V, with a typical supply current of 4mA. Packaged in an 8-pin DIP (PDIP8) configuration.
LF356
JFET input operational amplifier featuring a 5MHz bandwidth and 12V/µs slew rate. This single-channel amplifier offers a 3mV input offset voltage and 30pA input bias current, with a 1.5µs settling time. Designed for through-hole mounting in an 8-PDIP package, it operates from a dual supply voltage range of ±10V to ±18V, with a maximum supply voltage of ±36V. Key performance metrics include 80dB common mode rejection ratio and 80dB power supply rejection ratio.
L03R5000H1D1
Ledtech L03R5000H1D1, LxxR5000H Series Yellow LED, 585 nm 5mm (T-1 3/4), Round Lens Through Hole package
LM7815
Positive fixed 15V linear voltage regulator, delivering 1A output current with 2% accuracy. Features a 2V dropout voltage and a maximum input voltage of 35V, operating from 17.7V minimum input. This through-hole component is housed in a TO-220 package, suitable for applications with ambient temperatures from 0°C to 125°C. Offers 70dB power supply rejection ratio and 8mA quiescent current.
LRAT-2000-KIT
Fluke Networks LRAT-2000-KIT At 2000 Extended Test Kit. (Lrat 2000, Intellitone Pro)
LT1370IR#PBF
Adjustable DC/DC Controller, 6A, 35V, 30V In, D2PAK
LM324D
Quad operational amplifier featuring a 1.3MHz bandwidth and 0.4V/µs slew rate. This general-purpose amplifier offers low input bias current of 150nA and a voltage gain of 100dB. Designed for surface mounting in an SO package, it operates with dual supply voltages from 1.5V to 15V, or a single supply from 3V to 30V. The device boasts a common mode rejection ratio of 70dB and a maximum operating temperature of 70°C.