Maxim
MAX660CPA+
Switched Capacitor Converter, 0.12A, 80kHz Switching Freq-Max, CMOS, PDIP8, 0.300 INCH, PLASTIC, DIP-8
MAX6675ISA+T
Digital K-thermocouple-to-digital converter with cold-junction compensation, offering 12-bit resolution for temperature measurements from 0°C to +1024°C. Features SPI serial interface for data communication. Operates with a supply voltage of 5.5V and nominal supply current of 700µA. Packaged in a lead-free SOIC surface-mount case, measuring 5mm in length, 4mm in width, and 1.5mm in height. Suitable for applications requiring precise temperature monitoring within an operating temperature range of -20°C to +85°C.
MAX7219
LED Driver, 7-Segment, MOS, PDSO24, 0.300 INCH, MS-013, SOIC-24
MAX7219CNG+
8-output LED driver IC with common cathode configuration, supporting up to 64 segments. Features a 4-wire serial interface for easy control and operates from a 4V to 5.5V input voltage range. Delivers a maximum output current of 320mA at 4.5V, with a 10MHz switching frequency. Packaged in a DIP through-hole mount, this RoHS compliant component offers a maximum power dissipation of 1.066W and operates within a 0°C to 70°C temperature range.
MAX7219CWG+T
LED Driver, 7-Segment, MOS, PDSO24, 0.300 INCH, MS-013, SOIC-24
MAX7219EWG
LED Driver, 7-Segment, MOS, PDSO24, 0.300 INCH, MS-013, SOIC-24
MAX756
Boost DC/DC controller and regulator IC featuring a maximum output current of 200mA and a maximum output voltage of 5.5V. Operates with a minimum input voltage of 700mV and a maximum input voltage of 5.5V, achieving up to 87% efficiency. Packaged in an 8-pin SOIC for surface mounting, this RoHS compliant component offers a single positive output with fixed and adjustable voltage capabilities. Designed for operation across a wide temperature range of -40°C to 85°C.
MAX756ESA+
Boost DC/DC Controller IC, 5.5V, 200mA, SOIC
MAX9032ASA+
Dual comparator IC featuring ultra-small SOIC package for surface mount applications. Operates with dual supply voltages from 1.25V to 2.75V or single supply from 2.5V to 5.5V. Offers a 4mV hysteresis, 5mV input offset voltage, and 80nA input bias current. Achieves 100dB common mode rejection ratio and 100dB power supply rejection ratio. Includes TTL, push-pull outputs with a 188ns response time and 228ns propagation delay.
MAX9611AUB+
Single-channel current sense operational amplifier featuring a 2.5MHz gain bandwidth product and 4MHz -3dB bandwidth. This IC offers a 100dB common mode rejection ratio and operates from a 2.7V to 5.5V supply voltage. It boasts a low input bias current of 1uA and an input offset voltage of 350uV, with a maximum supply current of 2.6mA. Packaged in a compact UMAX case, this RoHS compliant component is suitable for applications requiring precise current monitoring.
MAX97220AETE+T
The MAX97220AETE+T is a surface-mount audio amplifier with a maximum operating temperature of 85°C and a minimum operating temperature of -40°C. It has a maximum supply voltage of 5.5V and a minimum supply voltage of 2.5V. The amplifier is RoHS compliant and has a power supply rejection ratio of 90dB. It is available in a tape and reel packaging with 2500 units per package.
MAX9814ETD+T
Mono audio amplifier IC featuring a 5.5V maximum supply voltage and 60dB voltage gain. This surface mount component operates from a 2.7V to 5.5V supply, offering 80dB power supply rejection ratio and 3.1mA operating current. Designed for 50 Ohm load impedance, it boasts a wide operating temperature range of -40°C to 85°C and is RoHS compliant.
MXL1344ACAG
Software-Selectable Cable Terminator 24-Pin SSOP
MXL1344ACAG
Software-Selectable Cable Terminator 24-Pin SSOP
MXL1344ACAG-T
Software-Selectable Cable Terminator 24-Pin SSOP T/R
VSC056KM
Enhanced Serial Backplane Controller