LM324DT
Quad operational amplifier featuring a 1.3MHz gain bandwidth product and 0.4V/µs slew rate. This general-purpose amplifier supports single or dual supply operation from 3V to 30V, with a maximum dual supply voltage of 15V. It offers a 70dB common mode rejection ratio and 100dB voltage gain, with an input bias current of 20nA and input offset voltage of 2mV. Packaged in a 14-pin SOIC for surface mounting, this RoHS compliant component operates within a 0°C to 70°C temperature range.
Similar Components
BAT42
General purpose rectifier diode featuring a 30V DC rated voltage and 200mA average rectified current. This Schottky diode offers a low capacitance of 7pF and a fast 5ns reverse recovery time. Packaged in a DO-35 through-hole case with axial termination, it operates from -65°C to 125°C and handles a peak non-repetitive surge current of 4A. RoHS compliant and lead-free.
BC817-40
NPN bipolar junction transistor (BJT) for surface mount applications. Features a 45V collector-emitter breakdown voltage and a 500mA maximum collector current. Offers a minimum DC current gain (hFE) of 250 and a transition frequency of 100MHz. Operates within a temperature range of -65°C to 150°C with a maximum power dissipation of 250mW. Packaged in a TO-236-3 (SOT-23) case, supplied on tape and reel.
BD135
NPN silicon bipolar junction transistor in a SOT-32 package. Features a maximum collector current of 1.5A and a collector-emitter breakdown voltage of 45V. Offers a minimum hFE of 25 and a collector-emitter saturation voltage of 500mV. Operates within a temperature range of -65°C to 150°C with a maximum power dissipation of 1.25W. Through-hole mount design with tin, matte contact plating. RoHS compliant.
NE555
The NE555 is a versatile timer IC used for precise timing, delays, and oscillations. Known for simple, reliable operation in mono-stable, astable modes using external R/C components, and drives loads up to 200mA, bridging analog/digital worlds with TTL compatibility, though modern CMOS versions (like TS555) offer lower power.
M24C02-WMN6TP
2 Kbit serial I²C bus EEPROM for surface mount applications. Features a 2-wire serial interface with a maximum frequency of 400kHz and an access time of 900ns. Operates with a supply voltage range of 2.5V to 5.5V, supporting 5V nominal operation. This RoHS compliant memory component is organized as 256 x 8 bits and includes write protection. Packaged in a compact SOIC case with dimensions of 4.9mm length, 3.9mm width, and 1.25mm height.
USBLC6-4SC6
Four-channel unidirectional ESD suppressor diode array for USB and Ethernet interfaces. Features a 5V working voltage, 6V reverse breakdown voltage, and 17V clamping voltage. With a low capacitance of 4pF and a peak pulse current of 5A, this surface mount component offers robust transient voltage suppression. Operating across a wide temperature range of -40°C to 125°C, it is RoHS compliant and lead-free.
About LM324DT
The Stmicroelectronics LM324DT Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Quad operational amplifier featuring a 1.3MHz gain bandwidth product and 0.4V/µs slew rate. This general-purpose amplifier supports single or dual supply operation from 3V to 30V, with a maximum dual supply voltage of 15V. It offers a 70dB common mode rejection ratio and 100dB voltage gain, with an input bias current of 20nA and input offset voltage of 2mV. Packaged in a 14-pin SOIC for surface mounting, this RoHS compliant component operates within a 0°C to 70°C temperature range.. Key parameters include Amplifier Type: GENERAL PURPOSE, Common Mode Rejection Ratio: 70dB, Dual Supply Voltage: 12V, Gain Bandwidth Product: 1.3MHz, and Height: 1.65mm. LM324DT is manufactured by Stmicroelectronics as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Stmicroelectronics
- Category
- Semiconductors
- File Size
- 1015 KB
Ask AI Assistant
Ask questions about LM324DT specifications
Click to ask a quick question:
Parameters
| Amplifier Type | GENERAL PURPOSE |
| Common Mode Rejection Ratio | 70dB |
| Dual Supply Voltage | 12V |
| Gain Bandwidth Product | 1.3MHz |
| Height | 1.65mm |
| Input Bias Current | 20nA |
| Input Offset Voltage (Vos) | 2mV |
| Input Voltage Noise Density | 40nV/sqrt Hz |
| Lead Free | Lead Free |
| Length | 8.75mm |
| Max Dual Supply Voltage | 15V |
| Max Operating Temperature | 70°C |
| Max Power Dissipation | 400mW |
| Max Supply Voltage | 30V |
| Min Dual Supply Voltage | 1.5V |
| Min Operating Temperature | 0°C |
| Min Supply Voltage | 3V |
| Mount | Surface Mount |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Operating Supply Current | 1.5mA |
| Operating Supply Voltage | 15V |
| Output Current per Channel | 70mA |
| Package/Case | SO |
| Package Quantity | 2500 |
| Packaging | Cut Tape |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Slew Rate | 0.4V/µs |
| Supply Type | Single, Dual |
| Technology | BIPOLAR |
| Voltage Gain | 100dB |
| Weight | 0.009143oz |
| Width | 4mm |