L298
Dual full bridge motor driver IC featuring bipolar technology, capable of driving brushed DC motors. Offers two independent driver channels with four outputs, supporting a maximum output current of 2A per channel and a maximum collector current of 4A. Operates with a supply voltage range from 4.8V to 46V, with a typical operating supply voltage of 42V. Includes over-temperature fault protection and a low drain-to-source resistance of 930mR. Packaged in a 15-pin MULTIWATT V configuration for through-hole mounting.
Similar Components
TDA2050V
Single-channel audio amplifier IC delivering 50W output power into a 4-ohm load. Features a wide operating supply voltage range from 4.5V to 25V dual supply, with a maximum dual supply of 25V. Offers 80dB voltage gain and a 5A output current per channel. Designed for through-hole mounting with a Pentawatt-5 package. RoHS compliant and lead-free.
TDA2003
10W, 1 CHANNEL, AUDIO AMPLIFIER, ZFM5, PENTAWATT-5
LM324DT
Quad operational amplifier featuring a 1.3MHz gain bandwidth product and 0.4V/µs slew rate. This general-purpose amplifier supports single or dual supply operation from 3V to 30V, with a maximum dual supply voltage of 15V. It offers a 70dB common mode rejection ratio and 100dB voltage gain, with an input bias current of 20nA and input offset voltage of 2mV. Packaged in a 14-pin SOIC for surface mounting, this RoHS compliant component operates within a 0°C to 70°C temperature range.
TIP41C
NPN bipolar junction transistor (BJT) with a maximum collector current of 6A and a maximum power dissipation of 65W. Features a collector-emitter voltage (VCEO) of 100V and a collector-base voltage (VCBO) of 100V. This through-hole component is housed in a TO-220 package, offering a minimum hFE of 15 and a maximum collector-emitter saturation voltage of 1.5V. Operating temperature range spans from -65°C to 150°C, with RoHS compliance.
BD138
PNP Bipolar Junction Transistor (BJT) in SOT-32 package. Features a maximum collector current of 1.5A and a collector-emitter voltage (VCEO) of 60V. Offers a maximum power dissipation of 1.25W and a collector-emitter saturation voltage of 500mV. Operates across a wide temperature range from -65°C to 150°C. Through-hole mount design with tin contact plating.
BC817-40
NPN bipolar junction transistor (BJT) for surface mount applications. Features a 45V collector-emitter breakdown voltage and a 500mA maximum collector current. Offers a minimum DC current gain (hFE) of 250 and a transition frequency of 100MHz. Operates within a temperature range of -65°C to 150°C with a maximum power dissipation of 250mW. Packaged in a TO-236-3 (SOT-23) case, supplied on tape and reel.
About L298
The Stmicroelectronics L298 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Dual full bridge motor driver IC featuring bipolar technology, capable of driving brushed DC motors. Offers two independent driver channels with four outputs, supporting a maximum output current of 2A per channel and a maximum collector current of 4A. Operates with a supply voltage range from 4.8V to 46V, with a typical operating supply voltage of 42V. Includes over-temperature fault protection and a low drain-to-source resistance of 930mR. Packaged in a 15-pin MULTIWATT V configuration for through-hole mounting.. Key parameters include Compliance Grade: ECOPACK1, Drain to Source Resistance: 930mR, ECCN: EAR99, Fault Protection: Over Temperature, and Height: 10.7mm. L298 is manufactured by Stmicroelectronics as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Stmicroelectronics
- Category
- Semiconductors
- File Size
- 908 KB
Ask AI Assistant
Ask questions about L298 specifications
Click to ask a quick question:
Parameters
| Compliance Grade | ECOPACK1 |
| Drain to Source Resistance | 930mR |
| ECCN | EAR99 |
| Fault Protection | Over Temperature |
| Height | 10.7mm |
| Interface | Logic |
| Lead Free | Lead Free |
| Length | 19.6mm |
| Max Collector Current | 4A |
| Max Operating Temperature | 130°C |
| Max Output Current | 2A |
| Max Supply Voltage | 46V |
| Military Spec | False |
| Min Operating Temperature | -25°C |
| Min Supply Voltage | 4.8V |
| Min Supply Voltage (DC) | 4.8V |
| Motor Type | Brushed |
| Mount | Through Hole |
| Number of Drivers | 2 |
| Number of Outputs | 4 |
| Operating Supply Current | 13mA |
| Operating Supply Voltage | 42V |
| Output Current | 2A |
| Output Voltage | 46V |
| Packaging | Rail/Tube |
| Radiation Hardening | No |
| Reach Svhc | No SVHC |
| Reach SVHC Compliant | No |
| RoHS | Yes |
| RoHS Compliant | Yes |
| Technology | BIPOLAR |
| Width | 5mm |