FT2232
Dual-channel USB 2.0 Hi-Speed interface controller, supporting 480Mbps data rates. Features include I²C and UART interfaces, with 2 channels and 4 transceivers. Operates from a 1.62V to 3.63V supply range, with a typical 3.3V operating voltage. This surface mount component is housed in a 64-pin LQFP package (10.1mm x 10.1mm x 1.4mm) and offers ESD protection. RoHS compliant and lead-free, it operates between -40°C and 85°C.
Similar Components
FT4232
Hi-Speed USB 2.0 bridge IC converts USB to four UART or serial channels. Two channels include MPSSE controllers for JTAG, SPI, I2C, bit-bang, and other synchronous serial modes. The device supports 480 Mbit/s USB high-speed operation, UART transfer rates up to 12 Mbaud, 3.3 V I/O with 5 V tolerance, and an industrial -40 °C to 85 °C operating range. Package options include lead-free QFN, LQFP, and VQFN variants with RoHS compliance.
FT232RL
Single-channel USB-to-UART interface IC with 256-byte transmit FIFO and 128-byte receive FIFO. Supports RS-232, RS-422, and RS-485 standards with a maximum data rate of 3MBd. Features a 28-pin SSOP package (MO-150AH) with gull-wing leads for surface mounting, measuring 10.2mm x 5.3mm x 1.75mm with a 0.65mm pin pitch. Operates from 3.3V to 5.25V with a typical supply voltage of 5V and a maximum supply current of 15mA. Extended operating temperature range from -40°C to 85°C.
FT232RL-Tube
USB-UART IC, 1-CH, 3MBd, 28-Pin SSOP, 5V
FT2232HL-TRAY
USB 2.0 Dual UART Controller, 480Mbps, 3.3V, LQFP-64
FT232R
USB UART interface IC provides single-chip USB to asynchronous serial data transfer with the USB protocol handled on chip. The interface supports 7- or 8-bit UART data, 1 or 2 stop bits, multiple parity modes, and hardware or X-On/X-Off software handshaking. Data rates extend from 300 baud to 3 Mbaud for TTL, RS422, and RS485 levels, with operation from a 3.3 V to 5.25 V supply. Integrated EEPROM, USB resistors, power-on reset, clock generation, and level conversion reduce external component requirements. The device operates over a -40 °C to 85 °C temperature range and is available in Pb-free RoHS-compliant 28-pin SSOP and QFN-32 packages.
About FT2232
The Ftdi FT2232 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Dual-channel USB 2.0 Hi-Speed interface controller, supporting 480Mbps data rates. Features include I²C and UART interfaces, with 2 channels and 4 transceivers. Operates from a 1.62V to 3.63V supply range, with a typical 3.3V operating voltage. This surface mount component is housed in a 64-pin LQFP package (10.1mm x 10.1mm x 1.4mm) and offers ESD protection. RoHS compliant and lead-free, it operates between -40°C and 85°C.. Key parameters include Data Rate: 480Mbps, Dual Supply Voltage: 3.3V, ESD Protection: Yes, Features: I²C, and Height: 1.4mm. FT2232 is manufactured by Ftdi as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Ftdi
- Category
- Semiconductors
- File Size
- 2 MB
Ask AI Assistant
Ask questions about FT2232 specifications
Click to ask a quick question:
Parameters
| Data Rate | 480Mbps |
| Dual Supply Voltage | 3.3V |
| ESD Protection | Yes |
| Features | I²C |
| Height | 1.4mm |
| Interface | UART |
| Length | 10.1mm |
| Max Operating Temperature | 85°C |
| Max Supply Voltage | 3.63V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 1.62V |
| Mount | Surface Mount |
| Number of Channels | 2 |
| Number of Transceivers | 4 |
| Operating Supply Current | 70mA |
| Operating Supply Voltage | 3.3V |
| Package/Case | LQFP |
| Package Quantity | 160 |
| Packaging | Tray |
| Radiation Hardening | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Series | USBmadeEZ-FIFO, FT-X, X-Chip |
| Width | 10.1mm |