AD8541ARTZ-REEL7
General-purpose, single operational amplifier featuring rail-to-rail output and a 1MHz gain bandwidth product. This CMOS amplifier offers a low input bias current of 4pA and an input offset voltage of 6mV. Operating from a 2.7V to 5.5V supply, it provides a 30mA output current per channel and a slew rate of 0.92V/µs. Packaged in a SOT-23-5, this RoHS compliant component operates within a temperature range of -40°C to 125°C.
Similar Components
AD8605ARTZ-REEL7
Single-channel, CMOS operational amplifier featuring 10MHz bandwidth and 120dB voltage gain. This precision op amp offers low input bias current of 0.2pA and 8nV/sqrt Hz input voltage noise density. Operating from 2.7V to 5.5V supply, it delivers 80mA output current per channel with a 5V/µs slew rate. Packaged in a compact SOT-23, this RoHS compliant component is supplied on tape and reel.
ADUM1200ARZ
Dual-channel digital isolator, featuring 2.5kV isolation voltage and 25Mbps data rate. This unidirectional interface IC operates from a 2.7V to 5.5V supply voltage, with a maximum input current of 10µA and output current of 35mA. Packaged in a 5mm x 4mm x 1.5mm R-type case with tin, matte contact plating, it offers a propagation delay of 150ns and pulse width distortion of 40ns. Operating temperature range is -40°C to 125°C.
AD8066ARZ
Dual operational amplifier featuring a 145MHz -3dB bandwidth and 180V/µs slew rate. This FastFET™ technology amplifier offers a 130MHz unity gain bandwidth product and 103dB voltage gain. Operating from a minimum dual supply of 2.5V up to a maximum of 12V, or a single supply from 5V to 24V, it exhibits a low input bias current of 2pA. The component boasts a 100dB common mode rejection ratio and power supply rejection ratio, with a settling time of 55ns.
AD827JNZ
Dual operational amplifier featuring a 50MHz bandwidth and 300V/µs slew rate. This general-purpose op amp offers a 35MHz gain bandwidth product, 15nV/sqrt Hz input voltage noise density, and 3.3µA input bias current. It operates from a dual supply voltage range of 4.5V to 18V, with a typical operating supply current of 13.5mA. The component boasts a 95dB common mode rejection ratio and 72dB power supply rejection ratio, with an output current capability of 32mA per channel. Packaged in a 9.27mm x 7.24mm x 3.43mm case with tin, matte contact plating, it supports a wide operating temperature range from -55°C to 125°C.
AD8226
Low cost instrumentation amplifier provides rail-to-rail output operation and uses one external resistor to set gains from 1 to 1000. The amplifier operates from 2.2 V to 36 V single supplies or ±1.35 V to ±18 V dual supplies. It supports inputs below the negative rail and includes input protection beyond the supplies for real-world sensor interfaces. The device is specified from -40°C to +125°C and is offered in 8-lead SOIC and MSOP package options.
ADM485ARZ
5V Half Duplex RS-485 Transceiver, operating at 5 Mbps. Features 3-state output, ESD protection, and a maximum supply current of 2.2mA. This surface mount component is housed in a SOIC package with tin, matte contact plating. It offers a wide operating temperature range from -40°C to 85°C and is RoHS compliant.
About AD8541ARTZ-REEL7
The Analog Devices AD8541ARTZ-REEL7 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: General-purpose, single operational amplifier featuring rail-to-rail output and a 1MHz gain bandwidth product. This CMOS amplifier offers a low input bias current of 4pA and an input offset voltage of 6mV. Operating from a 2.7V to 5.5V supply, it provides a 30mA output current per channel and a slew rate of 0.92V/µs. Packaged in a SOT-23-5, this RoHS compliant component operates within a temperature range of -40°C to 125°C.. Key parameters include Amplifier Type: GENERAL PURPOSE, Bandwidth: 1MHz, Common Mode Rejection Ratio: 40dB, Gain Bandwidth Product: 1MHz, and Input Bias Current: 4pA. AD8541ARTZ-REEL7 is manufactured by Analog Devices as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Analog Devices
- Category
- Semiconductors
- File Size
- 292 KB
Ask AI Assistant
Ask questions about AD8541ARTZ-REEL7 specifications
Click to ask a quick question:
Parameters
| Amplifier Type | GENERAL PURPOSE |
| Bandwidth | 1MHz |
| Common Mode Rejection Ratio | 40dB |
| Gain Bandwidth Product | 1MHz |
| Input Bias Current | 4pA |
| Input Offset Voltage (Vos) | 6mV |
| Input Voltage Noise Density | 42nV/sqrt Hz |
| Lead Free | Contains Lead |
| Max Operating Temperature | 125°C |
| Max Supply Voltage | 5.5V |
| Min Operating Temperature | -40°C |
| Min Supply Voltage | 2.7V |
| Number of Amplifiers | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Number of Elements | 1 |
| Operating Supply Current | 65uA |
| Output Current per Channel | 30mA |
| Package/Case | SOT-23-5 |
| Package Quantity | 3000 |
| Packaging | Tape and Reel |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Quest | 3243—$1.75$1.4——View offer |
| Quiescent Current | 65uA |
| Radiation Hardening | No |
| RoHS | Compliant |
| RoHS Compliant | Yes |
| Settling Time | 6us |
| Slew Rate | 0.92V/µs |
| Technology | CMOS |
| TME | 1,9781$0.796——$0.632pcsView offer |
| Unity Gain Bandwidth Product | 1MHz |
| Voltage Gain | 92.04dB |