Semiconductors
FR107W
The FR107 is a general purpose rectifier diode with a maximum forward current rating of 1A and a maximum repetitive reverse voltage rating of 1kV. It has a maximum operating temperature of 150°C and a minimum operating temperature of -65°C. The diode is packaged in a DO-41 case with an outside diameter of 2.7mm and a height of 5.2mm. It is not SVHC compliant.
FR207
MULTICOMP FR207 Standard Power Diode, Single, 1 kV, 2 A, 1.2 V, 60 A, 150 C
FRME36EBL
Fiber Optic Enclosure; Enclosure Type:Rack Mount; Enclosure Material:Steel; Body Color:Black; External Height - Imperial:3.5; External Height - Metric:89mm; External Width - Imperial:18.41; External Width - Metric:468mm ;RoHS Compliant: Yes
FRME72EBL
Fiber Optic Enclosure; Enclosure Type:Rack Mount; Enclosure Material:Steel; Body Color:Black; External Height - Imperial:7; External Height - Metric:178mm; External Width - Imperial:18.31; External Width - Metric:465mm ;RoHS Compliant: Yes
FRN200SJ680R
RESISTOR, FUSIBLE, FILM, 2W, 5%, 200ppm, 680ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT
FRN-R-110
This 39.62mm diameter fuse has a current rating of 110A and is made from fiberglass. It measures 3inch in length and has a DC rated voltage of 125V. The fuse is mounted via a stud termination and is packaged individually in bulk. It is not RoHS compliant.
FRN-R-4.5
Fuse 4.5A 250V Slow Blow Acting
FRN-R-6/10
The Fusetron FRN-R fuse is a 250V AC rated electrical fuse with a current rating of 600mA. It has a diameter of 0.56inch and a length of 2inch. The fuse is packaged in bulk quantities of 10 and features a clip termination. The Fusetron FRN-R fuse is approved to UL, CSA, and CE standards.
FRN-R-80
The Fusetron FRN-R fuse is a 80A current rating, 125V DC rated voltage, and 250V AC maximum voltage rating electrical fuse. It has a fiberglass body material and a 26.92mm diameter. The fuse is packaged in a carton with 5 units per package. It is approved by UL, CSA, and CE, and has a weight of 4.8oz.
FRN-R-90
The Fusetron FRN-R fuse is a 90A current rating, 250VAC maximum voltage rating, and 125VDC DC rated voltage fuse with a fiberglass body material. It is available in a bulk packaging with 5 fuses per package. The fuse has a stud mount type and a diameter of 26.92mm. It is not RoHS compliant and has approvals from UL, CSA, and CE.
FRS-R-2/10
Fuse Class RK5 Slow Blow Acting 0.2A 600V Holder Cartridge 20.57 X 127mm Carton CE/CSA/UL
FT2232
Dual-channel USB 2.0 Hi-Speed interface controller, supporting 480Mbps data rates. Features include I²C and UART interfaces, with 2 channels and 4 transceivers. Operates from a 1.62V to 3.63V supply range, with a typical 3.3V operating voltage. This surface mount component is housed in a 64-pin LQFP package (10.1mm x 10.1mm x 1.4mm) and offers ESD protection. RoHS compliant and lead-free, it operates between -40°C and 85°C.
FT2232HL
The FT2232HL is a USB interface IC with a single port, operating over a supply voltage range of 1.62V to 3.63V and a temperature range of -40°C to 85°C. It is available in an LQFP package with dimensions of 10mm in length, 10mm in width, and 1.4mm in height. The IC is lead-free and suitable for surface mount applications.
FT2232HL-TRAY
USB 2.0 Dual UART Controller, 480Mbps, 3.3V, LQFP-64
FT232R
USB UART interface IC provides single-chip USB to asynchronous serial data transfer with the USB protocol handled on chip. The interface supports 7- or 8-bit UART data, 1 or 2 stop bits, multiple parity modes, and hardware or X-On/X-Off software handshaking. Data rates extend from 300 baud to 3 Mbaud for TTL, RS422, and RS485 levels, with operation from a 3.3 V to 5.25 V supply. Integrated EEPROM, USB resistors, power-on reset, clock generation, and level conversion reduce external component requirements. The device operates over a -40 °C to 85 °C temperature range and is available in Pb-free RoHS-compliant 28-pin SSOP and QFN-32 packages.
FT232RL
Single-channel USB-to-UART interface IC with 256-byte transmit FIFO and 128-byte receive FIFO. Supports RS-232, RS-422, and RS-485 standards with a maximum data rate of 3MBd. Features a 28-pin SSOP package (MO-150AH) with gull-wing leads for surface mounting, measuring 10.2mm x 5.3mm x 1.75mm with a 0.65mm pin pitch. Operates from 3.3V to 5.25V with a typical supply voltage of 5V and a maximum supply current of 15mA. Extended operating temperature range from -40°C to 85°C.
FT232RL-Tube
USB-UART IC, 1-CH, 3MBd, 28-Pin SSOP, 5V
FT4232
Hi-Speed USB 2.0 bridge IC converts USB to four UART or serial channels. Two channels include MPSSE controllers for JTAG, SPI, I2C, bit-bang, and other synchronous serial modes. The device supports 480 Mbit/s USB high-speed operation, UART transfer rates up to 12 Mbaud, 3.3 V I/O with 5 V tolerance, and an industrial -40 °C to 85 °C operating range. Package options include lead-free QFN, LQFP, and VQFN variants with RoHS compliance.
FT4232HL
The FT4232HL is a quad-channel USB bridge IC with a data rate of 30Mbps. It is packaged in a lead-free LQFP package and is designed for surface mount applications. The IC operates over a temperature range of -40°C to 85°C and has an operating supply voltage of 3.6V.
FWA-250B
Fuse 250A 150V Bolt Tap 25.4 X 29.36mm UL