The Momentive Performance Materials RTF7000 Hardware datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: RTF7000 Variable Density Silicone Foam System. Key parameters include Additive Component: Methanol (Low Density Additive), Base Component: RTF7000, Color (Methanol): Clear, Color (RTF7000 Base): White, and Color (SS4300C): Clear. RTF7000 is manufactured by Momentive Performance Materials as part of their Hardware product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.

Specifications

Manufacturer: Momentive Performance Materials
Category: Hardware
File Size: 38 KB

Ask AI Assistant

Ask questions about RTF7000 specifications

AI Powered

Click to ask a quick question:

Parameters

Additive Component	Methanol (Low Density Additive)
Base Component	RTF7000
Color (Methanol)	Clear
Color (RTF7000 Base)	White
Color (SS4300C)	Clear
Compression (psi) @ 25% Deflection - No Postbake	0.2
Compression (psi) @ 25% Deflection - Postbake (15m/100°C)	0.6
Compression (psi) @ 25% Deflection - Postbake (5m/100°C)	0.7
Continuous Operating Temperature Range	-52 to 162
Continuous Operating Temperature Range	-60 to 350
Crosslinker Component	SS4300C
Deflection (ASTM D3574) @ 65% - No Postbake	0.7
Deflection (ASTM D3574) @ 65% - Postbake (15m/100°C)	2.5
Deflection (ASTM D3574) @ 65% - Postbake (5m/100°C)	2.6
Document Reference	HCD-10286 (Rev. 3/29/2016 2:01:09 PM)
Elongation (%) - No Postbake	40
Elongation (%) - Postbake (15m/100°C)	42
Elongation (%) - Postbake (5m/100°C)	47
Feature	Variable density between 5 and 16 pounds per cubic foot
Feature	Non-halogenated fire retardant foam
Feature	Low smoke generation
Feature	Low toxicity combustion by-products
Feature	Room temperature process capable
Feature	Foam develops without use of CFCs
Flammability Properties Condition	0.75 in. thick skinned samples at 7 pcf density
Mechanical Properties Condition	0.75 ft. thick skinned samples at 7 pcf density
Optical Density - 4 minutes (Flaming)	17
Optical Density - 4 minutes (Non-Flaming)	25
Optical Density - 90 seconds (Flaming)	7
Optical Density - 90 seconds (Non-Flaming)	11
OSU Rate of Heat Release - 2 Minute Integral Peak	89
OSU Rate of Heat Release - Peak	62
Rise Time Condition	22
Rise Time (minutes) - Mix Ratio (RTF7000:SS4300C:Methanol)	5 (100:7.5:0), 15 (100:7.5:0.4), 23 (100:7.5:1.0)
Smoke Density Test	ASTM E662 (NFPA 258)
Specific Gravity (Methanol)	0.79
Specific Gravity (RTF7000 Base)	1.23
Specific Gravity (SS4300C)	1.00
Standard	FAR 25.8538 - Vertical Flammability: Pass
Standard	FMVSS 302 Horizontal Burn: Pass
Target Density (pcf) - Mix Ratio (RTF7000:SS4300C:Methanol)	16 (100:7.5:0), 12 (100:7.5:0.5), 9 (100:7.5:0.8), 7 (100:7.5:1.2), 5 (100:7.5:1.6)
Tear Strength (lb/in) - No Postbake	0.8
Tear Strength (lb/in) - Postbake (15m/100°C)	1.1
Tear Strength (lb/in) - Postbake (5m/100°C)	1.2
Tensile Strength (psi) - No Postbake	11
Tensile Strength (psi) - Postbake (15m/100°C)	4
Tensile Strength (psi) - Postbake (5m/100°C)	4
Test Method	ASTM D3574
Test Method	ASTM E662 (NFPA 258)
Thermal Conductivity	1.2 x 10^-4
Thermal Conductivity	0.05
Thermal Properties Condition	0.75 in. thick skinned samples at 7 pcf density
Viscosity (Methanol) @ 25°C	1
Viscosity (RTF7000 Base) @ 25°C	65000
Viscosity (SS4300C) @ 25°C	15
Work Life (minutes) - Mix Ratio (RTF7000:SS4300C:Methanol)	1 (100:7.5:0), 3 (100:7.5:0.4), 4 (100:7.5:1.0)