24C02
Serial EEPROM stores 2048 bits organized as 256 words of 8 bits. The memory uses a two-wire serial interface with bidirectional SDA data and SCL clock pins. Compatible versions operate from 1.8 V to 5.5 V or 2.7 V to 5.5 V and support up to 100 kHz or 400 kHz clock rates. The device provides an 8-byte page write mode, a 5 ms maximum self-timed write cycle, hardware write protection, 1 million write-cycle endurance, and 100-year data retention.
Similar Components
24C64
64-Kbit serial EEPROM provides nonvolatile memory organized as 8,192 x 8 bits. The device uses an I2C-compatible two-wire serial interface and supports bidirectional data transfer. Page write operation supports up to 32 bytes with a self-timed write cycle. The memory is specified for high endurance and long data retention across low-voltage and standard-voltage operation variants.
TL074
IC OP-AMP, Operational Amplifier
15600-14-20
Fuse Panel 30A Panel Mount Lug
MCP23017-E/SO
16-bit I/O Expander with I2C and Serial interface, operating up to 1.7MHz. Features 16 configurable I/O pins, 25mA output current with PUSH-PULL output type, and a wide operating voltage range of 1.8V to 5.5V. Encased in a 28-pin SOIC package for surface mount applications, this component offers a maximum power dissipation of 700mW and operates between -40°C and 125°C. RoHS compliant and lead-free.
LM324
Low-power quad operational amplifier integrates four independent high-gain, internally frequency-compensated op amps. It operates from a single supply from 3 V to 30 V or dual supplies from ±1.5 V to ±15 V. The LM324 supports an input common-mode voltage range that includes ground and provides 1.3 MHz gain-bandwidth product with 0.4 V/µs slew rate. The LM324 commercial temperature range is 0 °C to 70 °C, with orderable package options including DIP14, SO-14, TSSOP14, and QFN16 3 mm x 3 mm.
630NHG3B
The Eaton 630NHG3B is a fuse holder rated for 630A current and 500V DC voltage. It has a silver contact plating and meets VDE approval standards. The holder is designed for use with 3A fuses and has a body height and length of 75mm. It is packaged in bulk and is RoHS compliant.
About 24C02
The Atmel 24C02 Semiconductors datasheet provides detailed technical specifications, pinout information, and operating characteristics. This component: Serial EEPROM stores 2048 bits organized as 256 words of 8 bits. The memory uses a two-wire serial interface with bidirectional SDA data and SCL clock pins. Compatible versions operate from 1.8 V to 5.5 V or 2.7 V to 5.5 V and support up to 100 kHz or 400 kHz clock rates. The device provides an 8-byte page write mode, a 5 ms maximum self-timed write cycle, hardware write protection, 1 million write-cycle endurance, and 100-year data retention.. Key parameters include Data Retention: 100, Data Word Address Length: 8, Endurance: 1000000, Industrial Operating Temperature: -40 to 85, and Interface: Two-wire serial. 24C02 is manufactured by Atmel as part of their Semiconductors product line. On this page you can view and download the PDF datasheet, check specifications, and find similar components.
Specifications
- Manufacturer
- Atmel
- Category
- Semiconductors
Ask AI Assistant
Ask questions about 24C02 specifications
Click to ask a quick question:
Parameters
| Data Retention | 100 |
| Data Word Address Length | 8 |
| Endurance | 1000000 |
| Industrial Operating Temperature | -40 to 85 |
| Interface | Two-wire serial |
| Maximum Clock Frequency at 1.8 V | 100 |
| Maximum Clock Frequency at 2.7 V or 5 V | 400 |
| Memory Organization | 256 x 8 |
| Memory Size | 2048 |
| Operating Voltage Range | 1.8 to 5.5 or 2.7 to 5.5 |
| Page Count | 32 |
| Page Size | 8 |
| Write Cycle Time Max | 5 |
| Write Protection | Full array protected when WP is tied to VCC |